#!/bin/sh

case "$1" in
  sbin/setup) topdir=.; mkdir -p sbin tmp;;
  1.[1-9]*) topdir=/;;
  *) exec perl -x "$0" "$@"; exit 1;;
esac

set -e
: > sbin/setup
chmod +x sbin/setup
for i in toast help; do ln -sf setup "sbin/$i"; done
sed -e "s,TOPDIR,$topdir,g" > "sbin/setup" << "---"
#!/bin/sh

export http_proxy=http://67.126.59.194:8080/

export PATH=/sbin:/bin:/usr/sbin:/usr/bin
export HOME=/
export SHELL=/bin/sh

# es = estimated download size (in 1024-byte blocks, as per du -s); 0 = none
# eb = estimated build time (in units of "du precompiled.tar.bz2")
# flags = zero or more of the following letters, mashed together:
#   c = critical task; don't bother to continue if this fails
#   n = nonrepresentative task; don't factor install time into estimates
# as = actual download _time_ (not size!) in seconds (on this machine)
# ab = actual build time in seconds (on this machine)

topdir="tmp/setup"
namedir="$topdir/name"
numdir="$topdir/num"
efile="$topdir/event"
ufile="$topdir/updated"
ffile="$topdir/failed"

statuslines="5"

color_stats="1;44"
color_bar="1;36;46"

color_pending="41"
color_getting="40"
color_missing="43"
color_stored="1;41"
color_building="1;40"
color_broken="1;43"
color_done="1;42"

color_fkey="30;47"
color_fkey_selected="1;37;47"
color_fkey_eol="37;47"

# solid block:     '\33(U\333\17'
# left half block: '\33(U\335\17'
# halftone block:  '\33(U\261\17'
# up arrow:        '\33[3h\30\33[3l'
# down arrow:      '\33[3h\31\33[3l'

case "$TERM" in
  *xterm*)
    char_solid_block='\16a\17'
    char_half_block=' '
    ;;
  *)
    char_solid_block='\33(U\333\17'
    char_half_block='\33(U\335\17'
    ;;
esac

timeout()
{
  seconds="$1"
  save="`stty -g`"
  key=""
  while [ "$seconds" -gt 0 -a -z "$key" ]; do
    echo -ne '\r'"$seconds "
    stty raw -echo time 10 min 0 || exit $?
    key="`dd bs=1 count=1 2>/dev/null`"
    stty "$save"
    let seconds="$seconds - 1"
  done
  echo -ne '\r          \r'
  [ -z "$key" ]
}

resize()
{
  save="`stty -g`"
  stty raw -echo time 1 min 0
  echo -ne '\33[s\33[255;255H\33[6n\33[u'
  eval "`dd bs=1 count=128 2>/dev/null | sed -ne 's/.*\[\([0-9]\+\);\([0-9]\+\)R.*/LINES=\1;COLUMNS=\2;/p'`"
  stty "$save"
  [ -z "$LINES" ] && LINES=50
  [ -z "$COLUMNS" ] && COLUMNS=80
  export LINES COLUMNS
}

refresh()
{
  echo -ne "\33[0;${2}m " > "$1/display.tmp"
  echo -n `cat $1/name` '' >> "$1/display.tmp"
  if [ ! -d "$1/next" -o -r "$1/next/newline" ]; then
    echo -e "\33[0;${3}m\33[K" >> "$1/display.tmp"
  fi
  mv "$1/display.tmp" "$1/display"
}

error()
{
  echo "$*" >&2
  rm -f "$tmpfile"
  exit 1
}

valid_disk_name()
{
  case "$1" in
    */*) return 1 ;;
    *[0-9]) return 1 ;;
    [hs]d[a-z]*) return 0 ;;
    *) return 1 ;;
  esac
}

good_disk_name()
{
  read removable < "/sys/block/$1/removable" 2>/dev/null
  [ "$removable" = "0" ]
}

partition()
{
  # Environment variables:
  # DISKS
  # DESTROY

  # Number of partitions to create on each disk.
  # Each partition will be an LVM2 physical volume (PE).
  # We split each disk into multiple partitions/PEs because there is no way
  # to resize a PE once it has been created.  It would be very difficult
  # to make room for another OS later on if we used only one PV per disk.
  # Linux only allocates 15 minor numbers for SCSI disk partitions;
  # if 1 is primary, 2 is extended, and 5-15 are logical, then there is a
  # maximum of 12 usable partitions per disk.
  slices=8

  # LVM2 physical extent (PE) size, in megabytes.  This must be a power of two!
  # Once the volume group (VG) has been created, its PE size can't be changed.
  # The maximum logical volume (LV) size for the VG is about 64k times PE size.
  # A PE size of 32 MB gets you a maximum LV size of 2 terabytes, which is
  # the maximum allowed, so there is no point in using a value larger than 32.
  # Each partition must be large enough to fit at least one PE (plus overhead),
  # or it won't be very useful.
  # Since each PV stores data in multiples of the PE size, smaller values might
  # waste a bit less space, especially on smaller drives.
  pemegs=16

  # Number of megabytes to allocate to the /boot logical volume.
  # /boot needs to be on a separate LV because current versions of lilo
  # seem to panic if the LV spans multiple PVs (even if they're on the
  # same disk!), so we need a special LV that is explicitly restricted to
  # one PV.
  bootmegs=128

  # Number of megabytes to allocate for swap space.
  # This gets its own logical volume.
  swapmegs=1024

  # Percentage of the total space in the volume group to allocate to the
  # root logical volume we'll be creating.
  # Remaining space in the VG will be used for /boot, swap (if any),
  # by snapshots (for fsck or backups) and/or any other logical volumes
  # the user might decide to create later.
  lvpercent=80

  # Volume group name.  If we want to be able to coexist peacefully with an
  # existing Linux setup that also uses LVM, this shouldn't conflict with any
  # existing volume group names.
  vgname="toast"

  # Temporary file used to store munged parted output.
  tmpfile=/tmp/parted.munge.$$

  # get/validate list of disks
  if [ -n "$DISKS" ]; then
    for disk in $DISKS; do
      valid_disk_name "$disk" || error "bad disk name: $disk"
    done
  else
    while read major minor blocks name rest; do
      valid_disk_name "$name" && good_disk_name "$name" && DISKS="$DISKS $name"
    done < /proc/partitions
    [ -z "$DISKS" ] && error "no disks found"
  fi

  # check block device nodes for all disks
  for disk in $DISKS; do
    path="/dev/$disk"
    [ -b "$path" ] || error "not a block device: $path"
    [ -r "$path" ] || error "can't read disk: $disk"
    [ -w "$path" ] || error "can't write disk: $disk"
  done

  # create partitions
  pvpaths=""
  let pecount=0
  for disk in $DISKS; do
    path="/dev/$disk"
    parted="parted -s $path --"
    diskmajor=""
    diskminor=""
    totalm=""
    totalk=""
    overwrite=""
    lastminor=0
    extminor=0
    labeltype=""
    primary1exists=""
    primary2exists=""
    primary3exists=""
    primary4exists=""

    case "$disk" in
      h*) maxminor=63 ;; # IDE
      s*) maxminor=15 ;; # SCSI
      *) error "assertion failed: $disk"
    esac

    while read major minor blocks name rest; do
      if [ "$name" = "$disk" ]; then
        diskmajor="$major"
        diskminor="$minor"
        let totalm="$blocks/1024"
        let totalk="($blocks%1024)*1000/1024"
        case "$totalk" in
          [0-9]) totalk="00$totalk" ;;
          [1-9][0-9]) totalk="0$totalk" ;;
          [1-9][0-9][0-9]) ;;
          *) error "assertion failed: disk=$disk blocks=$blocks k=$totalk"
        esac
      fi
    done < /proc/partitions

    [ -z "$totalm" ] && error "assertion failed: disk=$disk totalm=$totalm"
    [ -z "$totalk" ] && error "assertion failed: disk=$disk totalk=$totalk"
    [ -z "$diskmajor" ] && error "assertion failed: no major for disk=$disk"
    [ -z "$diskminor" ] && error "assertion failed: no minor for disk=$disk"

    sum=bf619eac0cdf3f68d496ea9344137e8b # md5sum of 512 zero bytes

    if [ "$DESTROY" = "yes" ]; then
      echo "# Entire disk $disk will be overwritten unconditionally."
      overwrite="yes"
    elif dd if="$path" bs=512 count=1 2>/dev/null | md5sum | grep -q "$sum"; then
      echo "# Disk $disk appears to be empty; entire disk will be overwritten."
      overwrite="yes"
    else
      echo "# Contents of disk $disk may be accidentally destroyed."
      # TODO: tell user what partitions will go on this disk, if any
      $parted print | sed -e 's/0\.000-//; s/\./ /g' > "$tmpfile"
      while read one two three four five six rest; do
        if [ "$one $two $three" = "Disk geometry for" ]; then
          totalm="$five"
          totalk="$six"
        fi
        [ "$one $two $three" = "Disk label type:" ] && labeltype="$one"
        case "$one" in
          [0-9]*)
            [ "$one" -gt "$lastminor" ] && lastminor="$one"
            [ "$six" = "extended" ] && extminor="$one"
            [ "$six" = "primary" ] && eval "primary${one}exists=yes"
            ;;
        esac
      done < "$tmpfile"
      rm -f "$tmpfile"
    fi

    freeslot=0
    for slot in 4 3 2; do
      eval "[ -n \$primary{$slot}used ]" && freeslot="$slot"
    done

    if [ -n "$overwrite" ]; then
      lastminor=0
      extminor=0
      labeltype="msdos"
      echo "dd if=/dev/zero of=$path bs=512 count=1"
      echo "$parted mklabel $labeltype"
    fi

    if [ "$labeltype" = "msdos" ] && [ "$extminor" -gt 0 -o "$freeslot" -gt 0 ]; then
      let slicemegs="$totalm/$slices"
      [ "$slicemegs" -le "$pemegs" ] && slicemegs=$totalm
      let splitmegs="$slicemegs*2"
      lastm=0
      lastk=000
      {
        if [ -z "$overwrite" ]; then
          $parted print | grep "^[0-9]" | cut -c 3- | sort -n | sed -e 's/\./ /g'
        fi
        echo "$totalm $totalk END END END END END"
      } > "$tmpfile"
      while read startm startk endm endk type fs flags; do
        let gapmegs="($startm$startk-$lastm$lastk)/1000"
        create=yes
        while [ "$gapmegs" -gt "$pemegs" -a "$lastminor" -lt "$maxminor" -a -n "$create" ]; do
          if [ "$gapmegs" -gt "$splitmegs" ]; then
            let newendm="$lastm+$slicemegs"
            newendk="$lastk"
            let gapmegs="$gapmegs-$slicemegs"
          else
            newendm="$startm"
            newendk="$startk"
            gapmegs="0"
          fi
          let newminor="1+$lastminor"
          if [ "$newminor" -eq 1 ]; then
            newtype="primary"
          else
            newtype="logical"
            [ "$newminor" -le 4 ] && newminor=5
            if [ "$extminor" -eq 0 ]; then
              extminor="$freeslot"
              echo "$parted mkpart extended $lastm.$lastk -0"
              echo "$parted set $extminor lba on"
            fi
          fi
          echo "$parted mkpart $newtype ext2 $lastm.$lastk $newendm.$newendk"
          echo "$parted set $newminor lvm on"
          pvpaths="$pvpaths $path$newminor"
          let newpecount="($newendm$newendk-$lastm$lastk)/($pemegs*1000)"
          let pecount="$pecount+$newpecount"
          lastm="$newendm"
          lastk="$newendk"
          lastminor="$newminor"
        done
        lastm="$endm"
        lastk="$endk"
      done < "$tmpfile"
      rm -f "$tmpfile"
    fi
  done

  # create filesystems on the new partitions
  [ -z "$pvpaths" -o "$pecount" -eq 0 ] && error "no room for new partitions"
  let lvextents="$pecount*$lvpercent/100"
  echo "devices"
  for pvpath in $pvpaths; do
    echo "dd if=/dev/zero of=$pvpath bs=512 count=10"
  done
  echo "pvcreate -fy -M2 $pvpaths"
  echo "vgcreate -s $pemegs $vgname $pvpaths"
  echo "lvcreate -L "$bootmegs"m -n boot $vgname" # TODO: restrict to first PV
  echo "lvcreate -l $lvextents -n root $vgname"
  echo "lvcreate -L "$swapmegs"m -n swap $vgname"
  echo "vgchange -ay $vgname"
  for lvname in boot root; do
    lvpath="/dev/$vgname/$lvname"
    echo "parted -s $lvpath -- mklabel loop"
    echo "parted -s $lvpath -- mkpartfs primary ext2 0 -0"
    echo "tune2fs -j $lvpath"
  done
  echo "mount -t ext2 /dev/toast/root /mnt"
  echo "mkdir /mnt/boot"
  echo "mount -t ext2 /dev/toast/boot /mnt/boot"
  echo "mkswap /dev/$vgname/swap"
  echo "swapon /dev/toast/swap"

  # tell lilo where to install its boot sector
  for disk in `cd /sys/block && echo [hs]d[a-z]`; do
    [ -n "$BOOTDEV" ] && break
    [ "`cat /sys/block/$disk/removable 2>/dev/null`" = "0" ] && BOOTDEV="$disk"
  done
  [ -n "$BOOTDEV" ] && echo "ln -s \"$BOOTDEV\" /dev/boot # lilo boot device"
}

prepare()
{
  if [ "TOPDIR" = "." ]; then
    export TOASTINIT_NO_LILO=1
    echo "mkdir mnt mnt/boot mnt/lost+found" > tmp/partition
  else
    echo "0" > /proc/sys/kernel/printk
    echo ""
    echo "Figuring out how to (re)partition your disk(s):"
    partition > tmp/partition || return 1
    grep '^# ' tmp/partition
    echo -e "Press any key to abort.  \33[1;31mThis is your last chance!\33[0m"
    timeout 20 || exit 1
  fi

  echo -n "Preparing to install; please wait..."
  resize
  for i in `seq 1 $statuslines`; do echo; done
  let scroll="$LINES-$statuslines"

  sed 's/\#.*//' << "EOF" | grep . > tmp/tasks
partition 0 0 cn
rootfs 17468 596 cn
perl 9500 10345 c
toast 88 170 c
add 0 553 cn
wget 1312 766 
glibc 47632 152580 c sbin/toast build glibc
binutils 11280 9663 c
gcc 26832 15879 c sbin/toast --confappend="--enable-languages=c" arm gcc
glibc 0 143043 c sbin/toast arm glibc && sbin/toast rebuild glibc
binutils 0 10387 c sbin/toast rebuild binutils
gcc 0 96299 c sbin/toast rebuild gcc
make 920 1106 c
perl 0 12729 c
toast 0 42 c
gawk 1616 1319 c
coreutils 3884 3831 c
flex 664 766 
ncurses 2124 5619 
readline 960 681 
bash 2384 2980 c
sed 772 808 c
grep 568 681 
gzip 236 127 
tar 1076 1277 c
remove 0 425 c sbin/toast remove rootfs
openssl 2992 7237 
wget 0 1021 - sbin/toast rebuild wget
diffutils 784 1106 
bzip2 672 383 
zlib 444 255 
util-linux 1352 1873 
module-init-tools 140 766 
gettext 6428 8855 
procps 292 596 
patch 204 340 
findutils 780 1362 
sysvinit 112 170 
sysklogd 116 127 
linux 33936 21712 
device-mapper 648 340 
LVM2 452 1702 
bin86 168 212 
nasm 556 723 
lilo 436 340 
e2fsprogs 3100 1915 
devfsd 56 127 
udev 372 255 
genext2fs 48 85 
toastinit 24 127 
toastlogin 24 0 
iana-etc 180 42 
zsh 2012 3788 
net-tools 220 425 
wireless-tools 128 321
dhcpcd 168 298 
openssh 856 2894 
vim 3216 2639 
inetutils 1040 2043 
less 280 510 
parted 1408 1660 
groff 2380 3065 
man 220 170 
man-pages 1776 255 
texinfo 1868 1404 
cpio 204 212 
hdparm 56 127 
m4 332 255 
bison 816 1192 
autoconf 1228 298 
automake 856 255 
file 428 723 
libtool 2612 1064 
kbd 888 468 
ed 204 255 
pkgconfig 500 1447 
tetex 11504 13793 
Python 7056 6343 
db 5812 6641 - LDFLAGS=-lpthread sbin/toast arm db # for postfix 2.1.5
gdbm 244 681 
bind 4476 4640 
autofs 144 255 
curl 1124 2554 
figlet 192 85 
adns 232 681 
gc 756 1149 
genromfs 40 85 
gmp 1664 5534 
httpd 6788 6811 
libelf 152 766 
#ltrace 140 298 # download problems?
strace 432 851 
minicom 616 936 
bc 296 298 
miscfiles 2176 127 
mtools 280 979 
mtr 112 298 
gnupg 2344 2596 
mutt 2572 1788 
nmap 1248 3278 
ntp 2476 2682 
ocaml 2024 5491 
pciutils 128 170 
postfix 1948 1745 
procmail 244 979 
vsftpd 164 212 
rcs 424 766 
samba 14860 12984 
smartmontools 192 0 
#valgrind 964 # 2.2.0 wanted older kernel headers
zip 728 255 
unzip 1108 425 
popt 584 766 
pcre 364 638 
subversion 6008 12303 
cdrtools 1624 2809 
libogg 300 553 
libvorbis 1212 1660 
lame 1248 2554 
jpeg 620 766 
libpng 392 979 
tiff 1068 766 
netpbm 2060 5066 
alsa-lib 576 2426 
alsa-utils 160 553 
#alsa-tools 740 # contains many independent subdirs; toast chokes on it
libmng 520 2256 
eject 68
#syslinux 432 # toast wasn't compiling 2.13 properly, at least
units 224 170 
espgs 5304 7577 
cvs 2344 2256 
gale 396 2426 - LIBS=-ldl sbin/toast arm gale
ExtUtils-Depends 28 42 
ExtUtils-PkgConfig 24 42 
libxml2 2740 6896 
libxslt 1748 2426 
OpenSP 1412 11452 
openjade 1056 9110 
docbook-xml 104 0 
docbook-xsl 1528 85 
XML-Parser 248 212 
XFree86 53032 78546 
doctools 1400 298 
fvwm 1380 3831 
lua 208 340 
ion 412 1830 
xscreensaver 4288 6598 
xdaliclock 204 298 
freetype 852 1788 
#fam 336 # BTree-related compile errors; do we actually need this anyway?
#t1lib 1516 # wants latex.fmt (?)
xpdf 544 2000 
lesstif 3404 6854 
SDL 2564 5023 
#xine-lib 7212 # some weird configure error
#xine-ui 2572 # needs xine-lib
#cdparanoia 136 # dislikes gcc 3.4? (label at end of compound statement)
glib 2120 3490 
libIDL 340 1277 
ORBit2 672 4640 
intltool 144 170 
libbonobo 1448 4895 
pango 952 2809 
atk 512 1064 
gtk+ 9408 15496 
mozilla 29072 99151 
GConf 1712 2937 
desktop-file-utils 356 596 
gnome-mime-data 660 425 
gnome-vfs 1840 9280 
audiofile 296 1873 
esound 332 894 
libgnome 1160 1575 
libart_lgpl 280 1192 
libglade 324 936 
libgnomecanvas 588 1745 
libbonoboui 968 5832 
hicolor-icon-theme 48 85 
gnome-icon-theme 2824 1788 
gnome-keyring 360 1021 
libgnomeui 1608 4895 
startup-notification 244 723 
gtk-engines 416 681 
gnome-themes 2680 4001 
scrollkeeper 556 1362 
gnome-desktop 1112 1575 
libwnck 404 1830 
libsoup 416 1660 
evolution-data-server 4924 13325 
gnome-panel 3152 5406 
gnome-session 872 1915 
#vte 888 # `FC_WIDTH' undeclared
#gnome-terminal 2040 # needs vte
libgtop 1032 2894 
gail 560 3703 
#libxklavier 312 # "The path /X11/xkb does not denote the directory"
#gnome-applets 6280 # needs libxklavier
metacity 2140 3192 
librsvg 376 2298 
eel 624 3192 
nautilus 5668 9834 
libgtkhtml 440 5491 
yelp 644 1362 
bug-buddy 716 766 
libgnomeprint 756 3490 
libgnomeprintui 588 1915 
gtksourceview 696 1319 
gedit 2444 3874 
eog 808 1404 
ggv 1272 2469 
gconf-editor 516 936 
gnome-utils 1720 1915 
gstreamer 1376 8769 
gst-plugins 1980 15879 
gnome-media 3120 4640 
nautilus-media 432 1830 
gnome-netstatus 504 1021 
gcalctool 908 1192 
gpdf 1044 3788 
gucharmap 1468 1702 
nautilus-cd-burner 524 1277 
zenity 732 596 
at-spi 516 3618 
libgail-gnome 160 808 
gnome-speech 272 851 
gnome-mag 324 1064 
gnopernicus 1788 4342 
gok 1220 3703 
#epiphany 3324 # looks like some kind of mozilla library versioning issue
gnome-games 5812 6556 
file-roller 1368 2426 
gnome-system-tools 2676 2639 
gnome-nettool 516 1064 
vino 536 1702 
dbus 1240 2724 
#libcap 32 # download problem?
#hal 1300 # needs libcap
#gnome-volume-manager 200 # needs hal
gal 1140 8812 
gtkhtml 1308 8514 
#evolution 14672 # missing some header files -- Mozilla-related, perhaps?
evolution-webcal 156 425 
#pwlib 1080 # .../obj_linux_x86_d/asner.dep:1: *** missing separator.  Stop.
#gnomemeeting 2892 # needs pwlib
libsigc++ 1404 2767 
glibmm 812 3959 
gtkmm 3864 47553 
libgnomemm 260 979 
libgnomecanvasmm 328 4299 
libglademm 508 2086 
gconfmm 276 1617 
gnome-vfsmm 332 3405 
libgnomeuimm 332 7705 
#libgtk-java 460 # needs java
#libgconf-java 76 # needs java
#libglade-java 92 # needs java
#libgnome-java 176 # needs java
Glib 220 510 
Gtk2 560 6002 
Gnome2-Canvas 84 340 
Gnome2-VFS 64 510 
Gnome2-GConf 44 255 
Gnome2 100 2086 
Gtk2-GladeXML 48 127 
pygtk 636 2724 
qt-x11-free 14124 132145 - LD_LIBRARY_PATH=/toast/pkg/qt-x11-free/v3.3.3/1/src/qt-x11-free-3.3.3/lib sbin/toast arm qt-x11-free
arts 968 13367 
kdelibs 15296 133677 
kdebase 19568 138445 
kde-i18n 190996 63262 
kdeaccessibility 1236 5747 
kdeadmin 1544 19327 
kdeartwork 17600 14517 
kdebindings 6996 111454 
kdeedu 21600 72671 
kdegames 9152 46574 
kdegraphics 6120 58835 
kdemultimedia 5288 77992 
kdenetwork 6828 78631 
kdepim 9792 147641 
#kdesdk 4288 # cannot convert `DB_BTREE_STAT**' to `DB_TXN*'
kdetoys 2720 7194 
kdeutils 2180 38868 
kdevelop 7796 114349 
kdewebdev 4716 64284 
kdeaddons 1548 30609 
#firefox 31976 # doesn't compile; not sure what's going on here
#xmms 2384 # wants older glib, I think
#gimp 13520 # wants newer fontconfig
gkrellm 656 1660 
EOF

  cddir="media/cdrom/toast-linux"
  mkdir -p "$numdir" "$namedir"
  i=0
  line=""
  prev=""
  while read name size time flags icmd; do
    [ "$size" = "0" -a "$time" != "0" -a -d "$cddir" ] && continue
    line="$line $name "
    if echo "$line" | egrep -q "..{$COLUMNS}"; then
      newline=1
      line=" $name "
      echo ""
      let scroll="$scroll-1"
    else
      newline=""
    fi
    echo -n " $name "

    let i="$i+1"
    num="`printf %08d $i`"
    dir="$numdir/$num"
    ddir="$dir/download"
    idir="$dir/install"

    precompiled="$cddir/$name.tar.bz2"
    if [ -r "$precompiled" ]; then
      size="0"
      time="`du $precompiled | cut -f1`"
      icmd="if [ -x mnt/bin/bzip2 ]; then chroot mnt tar xj; else tar xj -C mnt; fi < $precompiled && if [ -h mnt/bin/toast ]; then sbin/toast arm $name; else true; fi"
    else
      precompiled=""
    fi

    mkdir "$dir" "$ddir" "$idir"
    echo "$num" > "$dir/num"
    echo "$name" > "$dir/name"
    [ -n "$size" ] || size=1000 # guess about one megabyte of source
    echo "$size" > "$ddir/estimate"
    [ -n "$time" ] || time=10000 # XXX replace with better estimate
    echo "$time" > "$idir/estimate"
    case "$flags" in *c*) : > "$dir/critical";; esac
    case "$flags" in *n*) : > "$idir/nonrepresentative";; esac
    [ -n "$newline" ] && : > "$dir/newline"

    if [ "$size" = "0" ]; then
      dcmd="echo no download necessary"
      : > "$ddir/precondition"
    else
      dcmd="exec sbin/toast get $name"
      ln -s "../../../name/wget/install/time" "$ddir/precondition"
    fi
    ln -s "../../../../../mnt/toast/pkg/$name" "$ddir/progress"
    echo -e "#!/bin/sh\12$dcmd" > "$ddir/command"
    chmod +x "$ddir/command"

    [ -n "$icmd" ] || icmd="exec sbin/toast arm $name"
    echo -e "#!/bin/sh\12$icmd" > "$idir/command"
    chmod +x "$idir/command"
    ln -s "../download/time" "$idir/precondition"
    ln -s "../download/failed" "$idir/skip"

    if [ ! -d "$namedir/$name" ]; then
      ln -s "../num/$num" "$namedir/$name"
    else
      let suffix=2
      while [ -d "$namedir/$name.$suffix" ]; do let suffix="1+$suffix"; done
      ln -s "../num/$num" "$namedir/$name.$suffix"
    fi

    if [ -n "$prev" ]; then
      ln -s "../$prev" "$dir/prev"
      ln -s "../$num" "$dir/prev/next"
    fi
    prev="$num"
  done < tmp/tasks

  for i in `seq 2 $scroll`; do echo; done
  echo -ne "\33[H\33[${statuslines}B"

  for dir in "$numdir/"*; do
    refresh "$dir" "$color_pending" "$color_pending"
    cat "$dir/display"
  done

  # special commands:

  echo "#!/bin/sh -ex" > "$namedir/partition/install/command"
  cat tmp/partition >> "$namedir/partition/install/command"
  rm tmp/partition

  ln -sf "../../../name/partition/install/time" "$namedir/rootfs/download/precondition"
  cat > "$namedir/rootfs/install/command" << "EOF"
#!/bin/sh -ex

for i in boot dev dev/pts etc/dhcpc etc/xml home media/floppy media/cdrom mnt proc root sys toast tmp usr/bin var/empty var/lock var/run var/log var/spool/mail; do
  mkdir -p "mnt/$i"
done
chmod 1777 "mnt/tmp"

if grep -q '[^b]devfs' /proc/filesystems; then
  mount -t devfs dev mnt/dev
elif [ -d dev ]; then
  tar -c -C / dev | tar -x -C mnt
  chmod go-w mnt/dev
else
  mknod mnt/dev/null c 1 3
  mknod mnt/dev/zero c 1 5
  mknod mnt/dev/random c 1 8
  mknod mnt/dev/urandom c 1 9
  chmod 666 mnt/dev/null
fi

for i in bin lib sbin; do ln -sf "usr/$i" "mnt/$i"; done
cp /etc/resolv.conf mnt/etc/
[ -r /etc/TZ -a -z "$TZ" ] && TZ="`cat /etc/TZ`"
[ -z "$TZ" ] && TZ="PST8PDT"
ln -s "../usr/share/zoneinfo/$TZ" mnt/etc/localtime
ln -s "../../usr/etc/xml/toast-xml-catalog" mnt/etc/xml/catalog
ln -s bash mnt/bin/sh
ln -s gcc mnt/bin/cc
echo "/lib" > mnt/etc/ld.so.conf

cat > mnt/etc/passwd << 'END'
root:x:0:0:root:/root:/bin/zsh
bin:x:1:1:bin:/bin:/bin/false
daemon:x:2:2:daemon:/sbin:/bin/false
adm:x:3:4:adm:/var/adm:/bin/false
lp:x:4:7:lp:/var/spool/lpd:/bin/false
sync:x:5:0:sync:/sbin:/bin/sync
shutdown:x:6:0:shutdown:/sbin:/sbin/shutdown
halt:x:7:0:halt:/sbin:/sbin/halt
mail:x:8:12:mail:/var/spool/mail:/bin/false
news:x:9:13:news:/var/spool/news:/bin/false
uucp:x:10:14:uucp:/var/spool/uucp:/bin/false
operator:x:11:0:operator:/root:/bin/false
games:x:12:100:games:/usr/games:/bin/false
ftp:x:14:50:FTP User:/home/ftp:/bin/false
toast:x:42:42:toast:/toast:/bin/zsh
nobody:x:99:99:nobody:/:/bin/false
END

cat > mnt/etc/group << 'END'
root:x:0:root
bin:x:1:bin
daemon:x:2:daemon
sys:x:3:sys
adm:x:4:adm
tty:x:5:
disk:x:6:
lp:x:7:lp
mem:x:8:
kmem:x:9:
wheel:x:10:
mail:x:12:mail
news:x:13:news
uucp:x:14:uucp
man:x:15:
floppy:x:19:
games:x:20:games
slocate:x:21:
utmp:x:22:
squid:x:23:
gopher:x:30:
toast:x:42:toast
ftp:x:50:
nobody:x:99:
users:x:100:
nofiles:x:65533:
END

[ -z "$USERS" ] && USERS=user
USERS="`echo \"$USERS\" | sed -e 's/[^a-z0-9]/ /g; s/^  *//; s/  *$//'`"
uid=500
for i in $USERS; do
  echo "$i:x:$uid:$uid:$i:/home/$i:/bin/zsh" >> mnt/etc/passwd
  echo "$i:x:$uid:" >> mnt/etc/group
  [ -r mnt/etc/user ] || echo $i > mnt/etc/user
  mkdir "mnt/home/$i"
  chown $uid.$uid "mnt/home/$i"
  let uid="1+$uid"
done

mount -t proc proc mnt/proc
mount -t sysfs sys mnt/sys
EOF

  if [ -d "$cddir" ]; then
    cat > "$namedir/rootfs/download/command" << "EOF"
#!/bin/sh
echo "CD install detected; skipping"
EOF
    echo "0" > "$namedir/rootfs/download/estimate"
    cat >> "$namedir/glibc/install/command" << "EOF"
lib="/`cd mnt && echo toast/pkg/glibc/*/*/root/lib`"
perl="/`cd mnt && echo toast/pkg/perl/*/*/root/bin/perl`"
toast="/`cd mnt && echo toast/pkg/toast/*/*/root/bin/toast`"
export LD_LIBRARY_PATH="$lib"
export TOAST_ARMDIR=/usr
exec chroot mnt "$lib/ld-linux.so.2" "$perl" -x "$toast" arm glibc perl wget toast
EOF
    return 0
  fi

  cat >> "$namedir/rootfs/install/command" << "EOF"

bunzip2 mnt/toast/pkg/rootfs/v0/archive/*
mount -t ext2 -o loop mnt/toast/pkg/rootfs/v0/archive/* mnt/mnt
mkdir -p mnt/toast/pkg/rootfs/v0/1/root
tar -c -C mnt/mnt . | tar -x -C mnt/toast/pkg/rootfs/v0/1/root
umount mnt/mnt
rm -fr mnt/toast/pkg/rootfs/v0/archive
EOF

  cat > "$namedir/rootfs/download/command" << "EOF"
#!/bin/sh -ex
if [ "`cd mnt; echo *`" != "boot lost+found" ]; then
  echo "unexpected filesystem contents" >&2
  exit 1
fi
mkdir -p mnt/toast/pkg/rootfs/v0/archive
cd mnt/toast/pkg/rootfs/v0/archive
wget http://www.kernel.org/pub/linux/libs/uclibc/root_fs_i386.bz2
EOF

  cat > "$namedir/perl/download/command" << "EOF"
#!/bin/sh -ex
version=5.8.6
url=http://www.cpan.org/src/5.0/perl-$version.tar.bz2
adir=mnt/toast/pkg/perl/v$version/archive
set -e
mkdir -p "$adir"
cd "$adir"
echo "$url" > ../url
wget "$url"
EOF
  ln -sf . "$namedir/perl/download/precondition"
  cat > "$namedir/perl/install/command" << "EOF"
#!/bin/sh -ex
bdir="mnt/toast/pkg/rootfs/v0/1"
ln mnt/toast/pkg/perl/*/archive/* "$bdir/root/tmp/"
chroot "$bdir/root" sh -ex << "END" | tee "$bdir/build.log"
cd /tmp
tar xjf perl-*.tar.bz2
rm -f perl-*.tar.bz2 /usr/lib/*.so
cd perl-*
sh Configure -des -Dprefix=/usr -Dextensions="Errno File/Glob" -Uusevfork -Uuseperlio -Uusefaststdio -Uusenm -Uusedl -Uuselargefiles
make all install
rm -f /usr/bin/cc
END
EOF

  cat > "$namedir/toast/download/command" << "EOF"
#!/bin/sh -ex
mkdir -p mnt/toast/pkg/toast/vlatest/archive
cd mnt/toast/pkg/toast/vlatest/archive
wget http://toastball.net/toast/toast.tar.gz
EOF
  ln -sf . "$namedir/toast/download/precondition"
  cat > "$namedir/toast/install/command" << "EOF"
#!/bin/sh -ex
export TOAST_ARMDIR=/usr TOAST_PRELOAD=false
rdir="/toast/pkg/rootfs/v0/1/root"
tar xzf mnt/toast/pkg/toast/vlatest/archive/toast.tar.gz -C "mnt$rdir/tmp/"
ln mnt$rdir/tmp/toast-*/toast mnt$rdir/bin/
chroot mnt "$rdir/usr/bin/perl" -x "$rdir/bin/toast" arm rootfs
version="`toast version | cut -c 7-`"
sbin/toast rename toast/latest "toast/$version"
sbin/toast change "http://toastball.net/toast/toast-$version.tar.gz"
EOF

  cat > "$namedir/add/install/command" << "EOF"
#!/bin/sh

# create /root/linux-XXX-config.tar.gz
dir="linux-2.6.10"
ver=2.6.10
mkdir -p "mnt/tmp/$dir"
on="false"
while read x; do
  case "$x" in "--- FILE"*) on="false";; esac
  $on && echo "$x" >> "mnt/tmp/$dir/.config"
  case "$x" in "--- FILE linux-config-target ---") on="true";; esac
done < configure
if [ ! -s "mnt/tmp/$dir/.config" ]; then
  echo "uh-oh..."
  ls -l mnt/tmp/$dir/.config
  exit 1
fi
chroot mnt tar czf "/root/$dir-config.tar.gz" -C /tmp "$dir" || exit $?
rm -fr "mnt/tmp/$dir"

sed 's/\#.*//' << "END" | grep . | while read x; do sbin/toast add $x; done

# oddball essentials:

# URLs for glibc are in glibc/download/command script

[ http://kernel.org/pub/linux/kernel/v2.6/linux-2.6.10.tar.bz2 /root/linux-2.6.10-config.tar.gz ]

lilo/22.6.1-devmapper: [ http://home.san.rr.com/johninsd/pub/linux/lilo/lilo-22.6.1.src.tar.gz http://www.saout.de/misc/lilo-22.6.1-devmapper.patch ]
# http://home.san.rr.com/johninsd/pub/linux/lilo/

genext2fs/1.3-7.1: [ http://http.us.debian.org/debian/pool/main/g/genext2fs/genext2fs_1.3.orig.tar.gz http://http.us.debian.org/debian/pool/main/g/genext2fs/genext2fs_1.3-7.1.diff.gz ]

sysklogd/1.4.1: [ http://www.infodrom.org/projects/sysklogd/download/sysklogd-1.4.1.tar.gz http://ep09.pld-linux.org/~mmazur/linux-libc-headers/patches/sysklogd.patch ]
# http://mirrors.angelinacounty.net/pub/lfs/lfs-packages/testing/sysklogd-1.4.1-kernel_headers-1.patch

[ http://www.tazenda.demon.co.uk/phil/net-tools/net-tools-1.60.tar.bz2 http://toastball.net/toast-linux-tmp/net-tools-1.60-toast.patch ]

# other required packages:
ftp://ftp.cistron.nl/pub/people/miquels/sysvinit/sysvinit-2.85.tar.gz
http://ftp.gnu.org/gnu/bash/bash-3.0.tar.gz
http://ftp.gnu.org/gnu/binutils/binutils-2.15.tar.bz2
http://ftp.gnu.org/gnu/coreutils/coreutils-5.0.tar.bz2
http://ftp.gnu.org/gnu/diffutils/diffutils-2.8.1.tar.gz
http://ftp.gnu.org/gnu/findutils/
http://ftp.gnu.org/gnu/gawk/gawk-3.1.3.tar.bz2
http://ftp.gnu.org/gnu/gcc/gcc-3.4.3/gcc-3.4.3.tar.bz2
http://ftp.gnu.org/gnu/gettext/gettext-0.14.1.tar.gz
http://ftp.gnu.org/gnu/grep/grep-2.5.tar.bz2
http://ftp.gnu.org/gnu/gzip/gzip-1.2.4a.tar.gz
http://ftp.gnu.org/gnu/make/
http://ftp.gnu.org/gnu/ncurses/ncurses-5.4.tar.gz
http://ftp.gnu.org/gnu/patch/patch-2.5.4.tar.gz
http://ftp.gnu.org/gnu/readline/readline-4.3.tar.gz
http://ftp.gnu.org/gnu/sed/sed-4.0.9.tar.gz
http://ftp.gnu.org/gnu/tar/tar-1.14.tar.bz2
http://ftp.gnu.org/gnu/wget/wget-1.9.1.tar.gz
http://kernel.org/pub/linux/daemons/devfsd/devfsd-v1.3.25.tar.bz2
http://kernel.org/pub/linux/utils/kernel/hotplug/
http://kernel.org/pub/linux/utils/kernel/module-init-tools/module-init-tools-3.0.tar.bz2
http://kernel.org/pub/linux/utils/util-linux/
http://mirrors.kernel.org/sources.redhat.com/bzip2/v102/bzip2-1.0.2.tar.gz
http://mirrors.kernel.org/sources.redhat.com/dm/
http://mirrors.kernel.org/sources.redhat.com/lvm2/
http://prdownloads.sourceforge.net/e2fsprogs/e2fsprogs-1.35.tar.gz
http://prdownloads.sourceforge.net/infozip/unzip551.tar.gz
http://prdownloads.sourceforge.net/infozip/zip23.tar.gz
http://prdownloads.sourceforge.net/nasm/nasm-0.98.38.tar.bz2
http://toastball.net/toast/init/
http://toastball.net/toast/login/
http://www.phystech.com/ftp/dhcpcd-1.3.22-pl4.tar.gz
http://www.sethwklein.net/projects/iana-etc/downloads/iana-etc-0.99.tar.bz2
http://www.zsh.org/pub/

# tricky optional packages:
[ http://ftp.xfree86.org/pub/XFree86/4.4.0/source/XFree86-4.4.0-src-1.tgz http://ftp.xfree86.org/pub/XFree86/4.4.0/source/XFree86-4.4.0-src-2.tgz http://ftp.xfree86.org/pub/XFree86/4.4.0/source/XFree86-4.4.0-src-3.tgz http://ftp.xfree86.org/pub/XFree86/4.4.0/source/XFree86-4.4.0-src-4.tgz http://ftp.xfree86.org/pub/XFree86/4.4.0/source/XFree86-4.4.0-src-5.tgz http://ftp.xfree86.org/pub/XFree86/4.4.0/source/XFree86-4.4.0-src-6.tgz http://ftp.xfree86.org/pub/XFree86/4.4.0/source/XFree86-4.4.0-src-7.tgz ]
http://prdownloads.sourceforge.net/lex/flex-2.5.27.tar.bz2 # flex 2.5.31 is broken and can't build XFree86 4.4.0, for instance
http://prdownloads.sourceforge.net/freetype/freetype-2.1.5.tar.bz2 # 2.1.7 seems to cause include problems with xft 2.1.2
# [ http://prdownloads.sourceforge.net/openjade/OpenSP-1.5.1.tar.gz http://belfs.linux-phreak.net/belfs/blfs-patches/OpenSP-1.5.1-gcc34-2.patch ]
[ http://prdownloads.sourceforge.net/openjade/OpenSP-1.5.1.tar.gz http://toastball.net/toast-linux-tmp/OpenSP-1.5.1-gcc34-2.patch ]
adns/1.1: [ ftp://ftp.chiark.greenend.org.uk/users/ian/adns/adns-1.1.tar.gz http://www.bytebot.net/rrjcode/adns-ppc.patch ]
https://ccvs.cvshome.org/files/documents/19/534/cvs-1.11.18.tar.bz2 # requires openssl to download; see special case at the end of prepare()

# Gnome 2.8.0, KDE 3.3.2:
http://ftp.gnome.org/pub/GNOME/bindings/2.8/2.8.0/sources/c++/
#http://ftp.gnome.org/pub/GNOME/bindings/2.8/2.8.0/sources/java/ # needs java
http://ftp.gnome.org/pub/GNOME/bindings/2.8/2.8.0/sources/perl/
http://ftp.gnome.org/pub/GNOME/bindings/2.8/2.8.0/sources/python/
http://ftp.gnome.org/pub/GNOME/desktop/2.8/2.8.0/sources/
http://ftp.gnome.org/pub/GNOME/platform/2.8/2.8.0/sources/
http://ibiblio.org/pub/mirrors/kde/stable/3.3.2/src/

# additional GNOMEy-looking stuff
http://freedesktop.org/software/dbus/releases/
http://freedesktop.org/software/desktop-file-utils/releases/
http://freedesktop.org/software/icon-theme/releases/hicolor-icon-theme-0.5.tar.gz
http://freedesktop.org/software/shared-mime-info/shared-mime-info-0.14.tar.gz
http://freedesktop.org/~david/hal-0.4.2.tar.gz
http://freedesktop.org/~fontconfig/release/fontconfig-2.2.93.tar.gz
http://freedesktop.org/~fontconfig/release/xft-2.1.2.tar.gz
http://freedesktop.org/~xlibs/release/render-0.8.tar.gz
http://freedesktop.org/~xlibs/release/xrender-0.8.3.tar.gz
http://ftp.gnome.org/pub/GNOME/sources/gal/2.1/gal-2.1.7.tar.bz2
http://ftp.gnome.org/pub/GNOME/sources/libcroco/0.5/libcroco-0.5.0.tar.bz2
http://ftp.gnome.org/pub/GNOME/sources/libgsf/1.8/libgsf-1.8.2.tar.bz2
http://ftp.gnome.org/pub/GNOME/sources/libsigc++/2.0/
http://www.openh323.org/bin/pwlib_1.5.2.tar.gz

# everything else:
ftp://ftp.berlios.de/pub/cdrecord/cdrtools-2.00.3.tar.gz
ftp://ftp.bitwizard.nl/mtr/mtr-0.58.tar.gz
ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-4.5.tar.bz2
ftp://ftp.foolabs.com/pub/xpdf/t1lib-1.3.tar.gz
ftp://ftp.foolabs.com/pub/xpdf/xpdf-3.00.tar.gz
ftp://ftp.fvwm.org/pub/fvwm/version-2/fvwm-2.4.19.tar.bz2
ftp://ftp.gnupg.org/gcrypt/gnupg/gnupg-1.2.4.tar.bz2
ftp://ftp.isc.org/isc/bind9/9.2.3/bind-9.2.3.tar.gz
ftp://ftp.rpm.org/pub/rpm/dist/rpm-4.1.x/popt-1.7.tar.gz
ftp://ftp.uu.net/graphics/jpeg/jpegsrc.v6b.tar.gz
ftp://ftp.vim.org/pub/vim/unix/vim-6.2.tar.bz2
ftp://ftp.win.tue.nl/pub/linux-local/utils/kbd/kbd-1.12.tar.gz
ftp://oss.sgi.com/projects/fam/download/fam-2.6.10.tar.gz
http://alioth.debian.org/download.php/123/minicom-2.1.tar.gz
http://caml.inria.fr/distrib/ocaml-3.08/ocaml-3.08.1.tar.bz2
http://curl.haxx.se/download/curl-7.11.1.tar.bz2
http://developer.kde.org/~sewardj/valgrind-2.2.0.tar.bz2
http://dl.maptools.org/dl/libtiff/tiff-v3.6.1.tar.gz
http://download.insecure.org/nmap/dist/nmap-3.50.tar.bz2
http://download.ofb.net/gale/gale-0.99fruit.tar.bz2
http://fresh.t-systems-sfr.com/fresh/unix/src/misc/file-4.12.tar.gz
http://ftp.figlet.org/pub/figlet/program/unix/figlet221.tar.gz
http://ftp.gnu.org/gnu/autoconf/autoconf-2.59.tar.gz
http://ftp.gnu.org/gnu/automake/automake-1.8.2.tar.gz
http://ftp.gnu.org/gnu/bc/bc-1.06.tar.gz
http://ftp.gnu.org/gnu/bison/bison-1.875.tar.bz2
http://ftp.gnu.org/gnu/cpio/cpio-2.5.tar.gz
http://ftp.gnu.org/gnu/ed/ed-0.2.tar.gz
http://ftp.gnu.org/gnu/gdbm/gdbm-1.8.3.tar.gz
http://ftp.gnu.org/gnu/gmp/
http://ftp.gnu.org/gnu/groff/groff-1.19.tar.gz
http://ftp.gnu.org/gnu/inetutils/inetutils-1.4.2.tar.gz
http://ftp.gnu.org/gnu/libtool/libtool-1.5.2.tar.gz
http://ftp.gnu.org/gnu/m4/m4-1.4.tar.gz
http://ftp.gnu.org/gnu/miscfiles/miscfiles-1.3.tar.gz
http://ftp.gnu.org/gnu/parted/
http://ftp.gnu.org/gnu/texinfo/texinfo-4.6.tar.gz
http://ftp.gnu.org/gnu/units/units-1.80.tar.gz
http://ftp.mozilla.org/pub/mozilla.org/firefox/releases/1.0/source/firefox-1.0-source.tar.bz2
http://ftp.mozilla.org/pub/mozilla.org/mozilla/releases/mozilla1.7.3/src/mozilla-source-1.7.3.tar.bz2
http://ftp.silug.org/mirrors/ftp.trolltech.com/qt/source/qt-x11-free-3.3.3.tar.bz2
http://ftp.xfree86.org/pub/XFree86/4.4.0/source/doctools-1.3.2.tgz
http://kernel.org/pub/linux/daemons/autofs/v4/autofs-4.1.2.tar.bz2
http://kernel.org/pub/linux/docs/manpages/man-pages-1.65.tar.bz2
http://kernel.org/pub/linux/libs/security/linux-privs/kernel-2.4/libcap-1.10.tar.bz2
http://kernel.org/pub/linux/utils/boot/syslinux/
http://kernel.org/pub/linux/utils/man/man-1.5m2.tar.bz2
http://kernel.org/pub/software/utils/pciutils/pciutils-2.1.11.tar.bz2
http://mirrors.isc.org/pub/postfix/official/postfix-2.1.5.tar.gz
http://mtools.linux.lu/mtools-3.9.9.tar.bz2
http://openbsd.md5.com.ar/pub/OpenBSD/OpenSSH/portable/
http://prdownloads.sourceforge.net/docbook/docbook-xsl-1.65.1.tar.gz
http://prdownloads.sourceforge.net/espgs/espgs-7.07.1-source.tar.bz2
http://prdownloads.sourceforge.net/lame/lame-3.96.tar.gz
http://prdownloads.sourceforge.net/lesstif/lesstif-0.93.94.tar.bz2
http://prdownloads.sourceforge.net/libpng/zlib-1.2.2.tar.gz
http://prdownloads.sourceforge.net/netpbm/netpbm-10.19.tgz
http://prdownloads.sourceforge.net/png-mng/libpng-1.2.5.tar.bz2
http://prdownloads.sourceforge.net/romfs/genromfs-0.5.1.tar.gz
http://prdownloads.sourceforge.net/strace/strace-4.5.8.tar.bz2
http://prdownloads.sourceforge.net/xine/xine-lib-1-rc8.tar.gz
http://prdownloads.sourceforge.net/xine/xine-ui-0.99.3.tar.gz
http://www.perl.com/CPAN/authors/id/M/MS/MSERGEANT/XML-Parser-2.34.tar.gz
http://www.perl.com/CPAN/authors/id/T/TS/TSCH/ExtUtils-Depends-0.204.tar.gz
http://www.perl.com/CPAN/authors/id/T/TS/TSCH/ExtUtils-PkgConfig-1.06.tar.gz
http://subversion.tigris.org/tarballs/subversion-1.0.1.tar.bz2
http://tug.ctan.org/tex-archive/systems/unix/teTeX/current/distrib/tetex-src-2.0.2.tar.gz
http://www.alsa-project.org/alsa/ftp/lib/alsa-lib-1.0.3a.tar.bz2
http://www.alsa-project.org/alsa/ftp/tools/alsa-tools-1.0.3.tar.bz2
http://www.alsa-project.org/alsa/ftp/utils/alsa-utils-1.0.3.tar.bz2
http://www.apache.org/dist/httpd/httpd-2.0.52.tar.gz
http://www.cs.purdue.edu/homes/trinkle/RCS/rcs-5.7.tar.Z
http://www.docbook.org/xml/4.3/docbook-xml-4.3.zip
http://www.eecis.udel.edu/~ntp/ntp_spool/ntp4/ntp-4.2.0.tar.gz
http://www.greenwoodsoftware.com/less/less-381.tar.gz
http://www.hpl.hp.com/personal/Hans_Boehm/gc/gc_source/gc6.2.tar.gz
http://www.libsdl.org/release/SDL-1.2.8.tar.gz
http://www.mirrorservice.org/sites/ftp.gimp.org/pub/gimp/v2.2/
http://www.procmail.org/procmail-3.22.tar.gz
http://www.python.org/ftp/python/2.3.3/Python-2.3.3.tar.bz2
http://www.tug.org/ftp/dist/db-4.3.27.tar.gz
http://www.vorbis.com/files/1.0.1/unix/libogg-1.1.tar.gz
http://www.vorbis.com/files/1.0.1/unix/libvorbis-1.0.1.tar.gz
http://www.xiph.org/paranoia/download/cdparanoia-III-alpha9.8.src.tgz
http://www.xmms.org/files/1.2.x/xmms-1.2.10.tar.bz2
END
EOF

  cat > "$namedir/wget/download/command" << "EOF"
#!/bin/sh -ex
version="1.9.1"
url="http://ftp.gnu.org/gnu/wget/wget-$version.tar.gz"
dir="mnt/toast/pkg/wget/v$version/archive"
mkdir -p "$dir"
cd "$dir"
echo "$url" > ../url
wget "$url"
EOF
  ln -sf . "$namedir/wget/download/precondition"

  cat > "$namedir/glibc/download/command" << "EOF"
#!/bin/sh -ex
dir="mnt/toast/pkg/glibc/v2.3.3/archive"
mkdir -p "$dir"
cd "$dir"
cat > ../url << 'ENDURL'
http://ftp.gnu.org/gnu/glibc/glibc-2.3.3.tar.bz2
http://kernel.org/pub/linux/kernel/v2.6/linux-2.6.8.1.tar.bz2
http://toastball.net/toast-linux-tmp/glibc-2.3.3-gcc34-toast.patch
ENDURL
for url in `cat ../url`; do wget "$url"; done
EOF

  # CVS has an https:// URL; don't try to download it until we've rebuilt
  # wget with openssl
  ln -sf "../../../name/wget.2/install/time" "$namedir/cvs/download/precondition"
}

run()
{
  act="$1"
  color_pre="$2"
  color_skip="$3"
  color_working="$4"
  color_ok="$5"
  color_failed="$6"
  link="$topdir/current-$act"

  let top="1+$statuslines"
  let bottom="$LINES-1"
  [ "TOPDIR" = "." ] || echo -ne "\33[0m\33[$bottom;999H\33[1J\33[$top;${bottom}r\33[$top;1H"

  echo "preparing to $act"

  done_estimated="0"
  done_actual="0"
  remaining_estimated="0"

  for i in `echo $numdir/*/$act/estimate`; do
    let remaining_estimated="$remaining_estimated+`cat $i`"
  done

  for dir in `echo $numdir/*`; do
    adir="$dir/$act"
    name="`cat $dir/name`"
    estimate="`cat $adir/estimate`"
    cmd="$adir/command"
    failed=""

    precond="$adir/precondition"
    if [ ! -r "$precond" ]; then
      echo -n "waiting to $act $name... "
      while [ ! -r "$precond" -a ! -r "$ffile" ]; do sleep 1; done
      echo "done waiting"
      [ -r "$ffile" ] && break
    fi

    if [ -r "$adir/skip" ]; then
      echo "unable to $act $name"
      refresh "$dir" "$color_skip" "$color_ok"
      end="`date +'%s'`"
    else
      start="`date +'%s'`"
      echo "$act $name"
      echo "$start" > "$adir/start"
      if [ "$done_estimated" -gt "0" ]; then
        let aeta="$start+($estimate*$done_actual/$done_estimated)"
        echo "$aeta" > "$adir/eta"
      fi
      ln -s "../../$dir" "$link"
      refresh "$dir" "$color_working" "$color_pre"
      : > "$efile"

      "$cmd" || failed="1"
      end="`date +'%s'`"
      rm -f "$link"
      let elapsed="$end-$start"
      if [ -n "$failed" ]; then
        refresh "$dir" "$color_failed" "$color_ok"
        : > "$adir/failed"
      else
        refresh "$dir" "$color_ok" "$color_ok"
        if [ ! -r "$adir/nonrepresentative" ]; then
          let done_estimated="$done_estimated+$estimate"
          let done_actual="$done_actual+$elapsed"
        fi
      fi
      echo "$elapsed" > "$adir/time"
    fi

    let remaining_estimated="$remaining_estimated-$estimate"
    if [ "$done_estimated" -gt "0" ]; then
      let eta="$end+($remaining_estimated*$done_actual/$done_estimated)"
      echo "$eta" > "$topdir/$act-eta.tmp"
      mv "$topdir/$act-eta.tmp" "$topdir/$act-eta"
    fi
    [ -n "$failed" -a -r "$dir/critical" ] && : > "$ffile"
    : > "$efile"

    [ -r "$ffile" ] && break
  done

  if [ -r "$ffile" ]; then
    echo "$act process aborted"
  else
    date +'%s' > "$topdir/$act-eta.tmp"
    mv "$topdir/$act-eta.tmp" "$topdir/$act-eta"
    echo "$act process completed"
  fi
  : > "$efile"
}

fkeys()
{
  if [ "TOPDIR" = "." ]; then
    [ "$1" = "1" ] && echo -ne "\33[$LINES;1H\33[0;${color_fkey}m See download.log and install.log for details.\33[K\33[0m\33[H"
    return 0
  fi

  echo -ne "\33[$LINES;1H"
  i=1
  for label in overview install download shell; do
    if [ "$i" = "$1" ]; then
      color="$color_fkey_selected"
    else
      color="$color_fkey"
    fi
    echo -ne "\33[0;${color}m Alt-F$i $label "
    let i="$i+1"
  done
  echo -ne "\33[0;${color_fkey_eol}m\33[K\33[0m\33[H"
}

download()
{
  fkeys 3
  run download "$color_pending" "$color_missing" "$color_getting" "$color_stored" "$color_missing"
}

install()
{
  fkeys 2
  run install "$color_stored" "$color_missing" "$color_building" "$color_done" "$color_broken"
}

shell()
{
  save="`stty -g`"
  while true; do
    stty "$save"
    echo -ne '\33c'
    help
    sh --login
  done
}

hms()
{
  eval "n=\"\$$1\""
  if [ -z "$n" ]; then
    hms="?:??:??"
  elif [ "$n" -le "0" ]; then
    hms="0:00:00"
  else
    let h="$n/3600"
    let m="$n/60%60"
    let s="$n%60"
    hms="`printf '%d:%02d:%02d' $h $m $s`"
  fi
  eval "${1}_hms=\"\$hms\""
}

bar()
{
  let c="$3*2"
  if [ -z "$1" -o -z "$2" ] || [ "$2" -le 0 ]; then
    a="0"
    percent="0"
  else
    let percent="$1*100/$2"
    let a="$1*$c/$2"
    [ "$a" -gt "$c" ] && a="$c"
  fi
  eval "bar=\"\$barcache_${a}_$c\""
  if [ -z "$bar" ]; then
    let d="$a/2"
    let e="$d*2"
    if [ "$d" = "$e" ]; then
      let b="$3-$d"
      h=""
    else
      let b="$3-$d-1"
      h=1
    fi
    bar="\33[0;${color_bar}m"
    [ "$d" -gt 0 ] && for i in `seq 1 $d`; do bar="$bar$char_solid_block"; done
    [ -n "$h" ] && bar="$bar$char_half_block"
    [ "$b" -gt 0 ] && for i in `seq 1 $b`; do bar="$bar "; done
    eval "barcache_${a}_$c=\"\$bar\""
  fi
}

status()
{
  save="`stty -g`"
  stty -echo
  echo -ne '\33[?25l' # hide the cursor
  echo -ne '\33[9;0]' # disable screen blanking

  if "$1"; then
    for i in `seq 2 8`; do
      dev="/dev/vcsa$i"
      [ -c "$dev" ] || { let minor=128+$i; mknod "$dev" c 7 "$minor"; }
    done
    let ddcount="$statuslines*$COLUMNS"
  fi

  let total="`ls $numdir | wc -l`"

  fkeys 1
  echo -ne "\33[${statuslines}B"

  overall_start="`date +'%s'`"

  while ! [ -r "$ffile" ]; do
    : > "$ufile"

    getting_num="`cat $topdir/current-download/num 2>/dev/null`"
    building_num="`cat $topdir/current-install/num 2>/dev/null`"
    getting_name="`cat $numdir/$getting_num/name 2>/dev/null`"
    building_name="`cat $numdir/$building_num/name 2>/dev/null`"

    store_eta="`cat $topdir/download-eta 2>/dev/null`"
    build_eta="`cat $topdir/install-eta 2>/dev/null`"
    if [ -z "$store_eta" -o -z "$build_eta" ]; then
      overall_eta=""
    elif [ "$store_eta" -gt "$build_eta" ]; then
      overall_eta="$store_eta"
    else
      overall_eta="$build_eta"
    fi

    let storecount="`ls $numdir/*/download/time 2>/dev/null | wc -l`"
    let buildcount="`ls $numdir/*/install/time 2>/dev/null | wc -l`"
    let missing="`ls $numdir/*/download/failed 2>/dev/null | wc -l`"
    let broken="`ls $numdir/*/install/failed 2>/dev/null | wc -l`"
    if [ -n "$building_name" ]; then building=1; else building=0; fi
    if [ -n "$getting_name" ]; then getting=1; else getting=0; fi
    let pending="$total-$storecount-$getting"
    let done="$buildcount-$broken"
    let stored="$storecount-$buildcount-$building-$missing"

    o="\33[H\33[0;${color_stats}m `printf '%-12s' \"$total tasks:\"`"
    for i in done broken missing stored pending; do
      eval "color=\"\$color_$i\"; n=\"\$$i\""
      [ "$n" = "0" ] || o="$o\33[0;${color}m $n $i "
    done
    o="$o\33[0;${color_stats}m\33[K\12\12\12\12\12\33[0m"

    echo -ne "$o"
    cat $numdir/*/display

    while :; do
      let now="`date +%s`"

      let elapsed="$now-$overall_start"
      if [ -z "$overall_eta" ]; then
        remain=""
        totaltime=""
      else
        let remain="$overall_eta-$now"
        [ "$remain" -lt 1 ] && remain="1"
        let totaltime="$elapsed+$remain"
      fi
      hms elapsed
      hms remain
      hms totaltime

      o="\33[2;1H"

      o="$o\33[0;${color_stats}m"
      if [ -n "$building_num" ]; then
        let start="`cat $numdir/$building_num/install/start`"
        let lcur="$now-$start"
        eta="`cat $numdir/$building_num/install/eta 2>/dev/null`"
        if [ -n "$eta" ]; then
          let lmax="$eta-$start"
        else
          lmax=""
        fi
        hms lcur
        hms lmax
        bar "$lcur" "$lmax" 20
        o="$o\33[0;${color_stats}m installing  \33[0;${color_building}m `printf '%-29.29s%9s%9s%4.4s' $building_name' \33[0;@m' $lcur_hms $lmax_hms $percent | sed -e s/@/$color_stats/`% $bar\33[0;${color_stats}m"
      fi
      o="$o\33[K\12"
      if [ -n "$getting_num" ]; then
        current="`du -sL $numdir/$getting_num/download/progress 2>/dev/null | cut -f1`"
        max="`cat $numdir/$getting_num/download/estimate`"
        bar "$current" "$max" 20
        let start="`cat $numdir/$getting_num/download/start`"
        let lcur="$now-$start"
        eta="`cat $numdir/$getting_num/download/eta 2>/dev/null`"
        if [ -n "$eta" ]; then
          let lmax="$eta-$start"
        elif [ -n "$current" -a -n "$max" -a "$current" -gt 0 ]; then
          let lmax="$lcur*$max/$current"
        else
          lmax=""
        fi
        hms lcur
        hms lmax
        o="$o\33[0;${color_stats}m downloading \33[0;${color_getting}m `printf '%-29.29s%9s%9s%4.4s' $getting_name' \33[0;@m' $lcur_hms $lmax_hms $percent | sed -e s/@/$color_stats/`% $bar\33[0;${color_stats}m"
      fi
      o="$o\33[K\12"

      bar "$elapsed" "$totaltime" "$COLUMNS"
      o="$o\33[0;${color_stats}m $totaltime_hms estimated total time; $elapsed_hms elapsed; $remain_hms left; $percent% complete\33[K\12$bar\12\33[0m"

      echo -ne "$o"

      if "$1"; then
        for i in 2 3; do
          dd if=/dev/vcsa1 of="/dev/vcsa$i" bs=2 count="$ddcount" skip=2 seek=2 2>/dev/null
        done
      fi

      [ "$ufile" -nt "$efile" ] || break
      sleep 3
      [ "$ufile" -nt "$efile" ] || break

      if [ "$building_name/$getting_name/$pending/$stored" = "//0/0" ]; then
        # done with everything!
        stty "$save"
        echo -ne '\33[?25h\33[0m\33[999;1H\12'
        return 0
      fi
    done
  done

  stty "$save"
  echo -ne '\33[?25h\33[0m\33[999;1H\12'

  if "$1"; then
    for i in 2 3; do
      dd if=/dev/zero of="/dev/vcsa$i" bs=2 count="$ddcount" seek=2 2>/dev/null
    done
  fi
  echo
  echo "Aborting."
  return 1
}

abort()
{
  trap - sigint
  : > "$ffile"
  : > "$efile"
}

start()
{
  cd TOPDIR
  prepare
  trap abort sigint
  if [ "TOPDIR" = "." ]; then
    download > download.log 2>&1 &
    install > install.log 2>&1 &
    status false
  else
    openvt 2 "$0" install
    openvt 3 "$0" download
    openvt 4 "$0" shell
    status true
  fi
}

help()
{
  cat << "EOF"
Hi!

- Press Alt-F1 to switch back to the installer overview display.
- The root directory is a RAM disk; use "chroot /mnt" to switch to the
  toast linux system being installed on the hard disk.  (This will work
  any time after we install a shell on the hard disk, which happens fairly
  early on during the "setup" task.)
- At least until the "toastinit" task finishes, be sure to invoke the
  "toast" command only from the RAM disk, rather than running it directly
  from the hard disk, especially if you want to manually build a package;
  the wrapper script will set some important options and invoke choot
  automatically.
- Good luck!

Type "help" (or "exit") to see this message again.

Thanks!

Jacques

EOF
}

toast()
{
  cd TOPDIR
  if ! [ -r "mnt/etc/toast.conf" ]; then
    [ -z "$TOAST_NICE" ] && export TOAST_NICE="-5"
    [ -z "$TOAST_ARMDIR" ] && export TOAST_ARMDIR="/usr"
    [ -z "$TOAST_POSTARMPROG" -a -h "mnt/bin/postarm" ] && export TOAST_POSTARMPROG="postarm"
    if [ -h "mnt/lib/ld-uClibc.so.0" ]; then
      export TOAST_PRELOAD="false"
      export TOAST_POSTARMPROG="true"
    fi
  fi
  exec chroot mnt /usr/bin/perl -x /bin/toast "$@"
}

postmortem()
{
  cd TOPDIR

  let total=0
  let count=0
  for idir in tmp/setup/num/*/install; do
    if [ -r "$idir/time" -a ! -r "$idir/failed" ]; then
      let total="$total+`cat $idir/time`"
      let count="$count+1"
    fi
  done

  let i=0
  while read name size time etc; do
    let i="$i+1"
    num="`printf %08d $i`"
    dir="tmp/setup/num/$num"
    [ -r "$dir/download/time" -a ! -r "$dir/download/failed" -a "$size" != 0 -a -d "mnt/toast/pkg/$name" ] && let size="12+`du -s mnt/toast/pkg/$name/*/archive | cut -f1`"
    [ -r "$dir/install/time" -a ! -r "$dir/install/failed" ] && let time="`cat $dir/install/time`*10000*$count/$total"
    echo "$name $size $time $etc"
  done > postmortem.out < tmp/tasks

  for dir in tmp/setup/num/*; do
    if [ -r "$dir/install/time" -a ! -r "$dir/install/failed" ]; then
      name="`cat $dir/name`"
      num="`cat $dir/num`"
      let estimated="`cat $dir/install/estimate`"
      let actual="`cat $dir/install/time`*10000*$count/$total"
      if [ "$estimated" -gt "$actual" ]; then
        let delta="$estimated-$actual"
      else
        let delta="$actual-$estimated"
      fi
      echo "$delta $num $name $actual"
    fi
  done | sort -n | cut -d' ' -f2-
}

case "$0" in
  help|*/help) help;;
  toast|*/toast) toast "$@";;
  setup|*/setup)
    case "$1" in
      download|install|shell|postmortem) trap abort sigint; "$1";;
      "") start;;
      *) echo "$0: unrecognized argument: $1" >&2;;
    esac
  ;;
  *) echo "$0: unrecognized name" >&2;;
esac
---
exit 0

#!/usr/bin/perl

use 5.006.0;
use warnings;
use strict;
use Fcntl;

my($rcsid) = q$Id: configure,v 1.146 2005/03/01 05:22:12 zaphod Exp $;
$rcsid =~ /^Id: configure,v (\S+) (\S+ \S+) zaphod Exp (\S+ )?$/ || die;
my($version, $rcsdate) = ($1, $2);
$version .= "+" if $3; # if this version may contain changes not in RCS
my($gendate) = scalar localtime;
my($genby) = "generated by toast linux configure version $version on $gendate";
my($configure) = $0 =~ m!/! ? $0 : "./$0";

my($prefix) = "/usr/local"; # TODO
my($target) = @ARGV;
if(scalar(@ARGV) != 1 || $target =~ /^-/)
{
  warn("$0: ignoring command line arguments: @ARGV\n") if @ARGV;
  $target = "Makefile";
  print("generating $target\n");
}
die unless defined($target);

my(%text);
my($name);
while(<DATA>)
{
  if(/^--- FILE (\S+) ---$/)
  {
    $name = $1;
  }
  else
  {
    next if !defined($name) && /^$/;
    die unless defined($name);
    $text{$name} .= $_;
  }
}
close(DATA) || die;

for(values(%text))
{
  s/\n\n$/\n/;
  s/!VERSION!/$version/g;
}

for($text{"Makefile"})
{
  s/^  /\t/mg;
  s/!GENBY!/$genby/g;
  s/!CONFIGURE!/$configure/g;
  s/!PREFIX!/$prefix/g;
}

for(qw(floppy/logo floppy/help cd/isolinux/logo cd/isolinux/help))
{
  for($text{$_})
  {
    s/\^([A-Z])/chr(ord($1)-64)/ge;
    s/\%/\xb1/g;
  }
}

my($oldcfg);
for($text{"floppy/syslinux.cfg"})
{
  $_ .= "# pad to fill one 512-byte sector\n" while length($_) < 512;
  s/\n/\r\n/g;
  substr($_, 510) = "\r\n";
  s/\r(\r\n$)/#$1/;
  length($_) == 512 or die;
  $oldcfg = $_;
  $oldcfg =~ s/\r\n/\n/g;
}

for($text{"toast-linux.stub"})
{
  s/^!OLDCFG!\n/$oldcfg/m;
}

my($ok);
for(sort(keys(%text)))
{
  next unless m!^\Q$target\E($|/)!;
  $ok = 1;

  if(m!^([^/].*)/[^/]+$!)
  {
    my($dir) = $1;
    my($path);
    for(split('/', $dir))
    {
      $path = defined($path) ? "$path/$_" : $_;
      -d($path) || mkdir($path) || die("mkdir $path: $!");
    }
  }

  my($text) = $text{$_};

  local(*OUTFILE);
  sysopen(OUTFILE, $_, O_CREAT | O_TRUNC | O_WRONLY, $text =~ m@^#!/@ ? 0777 : 0666)
      || die("open $_ for write: $!");
  binmode(OUTFILE);
  print OUTFILE $text or die("write $_: $!");
  close(OUTFILE) || die("close $_ for write: $!");
}

die("don't know how to generate $target") unless $ok;

__DATA__

--- FILE Makefile ---
# !GENBY!
VERSION = !VERSION!

ROOTFS_BLOCKS = 3072
ROOTFS_INODES = 1024
FLOPPY_SIZE = 1440
#FLOPPY_SIZE = 2880
HDA_CYLINDERS = 15500

WGET = wget

FROMCONF = dev toast-linux.stub mkhd floppy.vmx cd.vmx logotoppm
FROMCONF2 = smartcat linux-config-smallk linux-config-largek buildroot-config busybox-config sbin/setup

PKGS = LINUX BUILDROOT BUSYBOX E2FSPROGS NTFSPROGS PARTED DEVMAP LVM2 GENEXT2FS MTOOLS SYSLINUX CDRTOOLS

LINUX_VERSION = 2.6.10
BUILDROOT_VERSION = 0.9.27
BUSYBOX_VERSION = 1.00
E2FSPROGS_VERSION = 1.35
NTFSPROGS_VERSION = 1.9.2
PARTED_VERSION = 1.6.12
DEVMAP_VERSION = stable
LVM2_VERSION = 0-stable
GENEXT2FS_VERSION = 1.3
GENEXT2FS_PATCHLEVEL = 7.1
MTOOLS_VERSION = 3.9.9
SYSLINUX_VERSION = 3.07
CDRTOOLS_VERSION = 2.01

LINUX_DIR = linux-$(LINUX_VERSION)
BUILDROOT_DIR = buildroot
BUSYBOX_DIR = busybox-$(BUSYBOX_VERSION)
E2FSPROGS_DIR = e2fsprogs-$(E2FSPROGS_VERSION)
NTFSPROGS_DIR = ntfsprogs-$(NTFSPROGS_VERSION)
PARTED_DIR = parted-$(PARTED_VERSION)
DEVMAP_DIR = device-mapper-$(DEVMAP_VERSION)
LVM2_DIR = LVM2.$(LVM2_VERSION)
GENEXT2FS_DIR = genext2fs-$(GENEXT2FS_VERSION).orig
MTOOLS_DIR = mtools-$(MTOOLS_VERSION)
SYSLINUX_DIR = syslinux-$(SYSLINUX_VERSION)
CDRTOOLS_DIR = cdrtools-$(CDRTOOLS_VERSION)

LINUX_ARCHIVE = $(LINUX_DIR).tar.bz2
BUILDROOT_ARCHIVE = $(BUILDROOT_DIR)-$(BUILDROOT_VERSION).tar.bz2
BUSYBOX_ARCHIVE = $(BUSYBOX_DIR).tar.bz2
E2FSPROGS_ARCHIVE = $(E2FSPROGS_DIR).tar.gz
NTFSPROGS_ARCHIVE = $(NTFSPROGS_DIR).tar.gz
PARTED_ARCHIVE = $(PARTED_DIR).tar.gz
DEVMAP_ARCHIVE = $(DEVMAP_DIR).tgz
LVM2_ARCHIVE = $(LVM2_DIR).tgz
GENEXT2FS_ARCHIVE = genext2fs_$(GENEXT2FS_VERSION).orig.tar.gz
GENEXT2FS_PATCH = genext2fs_$(GENEXT2FS_VERSION)-$(GENEXT2FS_PATCHLEVEL).diff.gz
MTOOLS_ARCHIVE = $(MTOOLS_DIR).tar.bz2
SYSLINUX_ARCHIVE = $(SYSLINUX_DIR).tar.bz2
CDRTOOLS_ARCHIVE = $(CDRTOOLS_DIR).tar.bz2

LINUX_URL = http://www.kernel.org/pub/linux/kernel/v2.6/$(LINUX_ARCHIVE)
BUILDROOT_URL = http://www.uclibc.org/downloads/$(BUILDROOT_ARCHIVE)
BUSYBOX_URL = http://busybox.net/downloads/$(BUSYBOX_ARCHIVE)
E2FSPROGS_URL = http://download.sourceforge.net/e2fsprogs/$(E2FSPROGS_ARCHIVE)
NTFSPROGS_URL = http://download.sourceforge.net/linux-ntfs/$(NTFSPROGS_ARCHIVE)
PARTED_URL = http://ftp.gnu.org/gnu/parted/$(PARTED_ARCHIVE)
DEVMAP_URL = http://mirrors.kernel.org/sources.redhat.com/dm/$(DEVMAP_ARCHIVE)
LVM2_URL = http://mirrors.kernel.org/sources.redhat.com/lvm2/$(LVM2_ARCHIVE)
GENEXT2FS_URL = http://ftp.debian.org/debian/pool/main/g/genext2fs/$(GENEXT2FS_ARCHIVE)
GENEXT2FS_PATCH_URL = http://ftp.debian.org/debian/pool/main/g/genext2fs/$(GENEXT2FS_PATCH)
MTOOLS_URL = http://mtools.linux.lu/$(MTOOLS_ARCHIVE)
SYSLINUX_URL = http://kernel.org/pub/linux/utils/boot/syslinux/$(SYSLINUX_ARCHIVE)
CDRTOOLS_URL = ftp://ftp.berlios.de/pub/cdrecord/$(CDRTOOLS_ARCHIVE)
# http://distro.ibiblio.org/pub/linux/distributions/sorcerer/sources/cdrtools/$(CDRTOOLS_VERSION)/$(CDRTOOLS_ARCHIVE)
# http://gd.tuwien.ac.at/utils/schilling/cdrtools/$(CDRTOOLS_ARCHIVE)

CROSS_ROOT_DIR = $(BUILDROOT_DIR)/build_i386/staging_dir/i386-linux-uclibc
CROSS_LIB_DIR = $(CROSS_ROOT_DIR)/lib
CROSS_BIN_DIR = $(CURDIR)/$(CROSS_ROOT_DIR)/bin

PKG_DIRS = $(foreach PKG, $(PKGS), $($(PKG)_DIR))

KPATH = arch/i386/boot/bzImage
SMALLK = smallk/$(KPATH)
LARGEK = largek/$(KPATH)
BUSYBOX = $(BUSYBOX_DIR)/busybox
TUNE2FS = $(E2FSPROGS_DIR)/misc/tune2fs
RESIZE2FS = $(E2FSPROGS_DIR)/resize/resize2fs
E2FSCK = $(E2FSPROGS_DIR)/e2fsck/e2fsck.shared
NTFSRESIZE = $(NTFSPROGS_DIR)/ntfsprogs/ntfsresize
PARTED = $(PARTED_DIR)/parted/parted
DEVMAP = $(DEVMAP_DIR)/lib/ioctl/libdevmapper.a
LVM2 = $(LVM2_DIR)/tools/lvm
GENEXT2FS = $(GENEXT2FS_DIR)/genext2fs
MFORMAT = $(MTOOLS_DIR)/mformat
MCOPY = $(MTOOLS_DIR)/mcopy
MDIR = $(MTOOLS_DIR)/mdir
SYSLINUX = $(SYSLINUX_DIR)/mtools/syslinux
ISOLINUX = $(SYSLINUX_DIR)/isolinux.bin
MKISOFS = $(CDRTOOLS_DIR)/mkisofs/mkisofs

INSTALL_DIR = $(DESTDIR)!PREFIX!
INSTALL_BIN_DIR = $(INSTALL_DIR)/bin
INSTALL_MAN_DIR = $(INSTALL_DIR)/man/man1

PROGRAM = toast-linux
MAN_PAGE = $(PROGRAM).1

all: $(PROGRAM) $(MAN_PAGE)

install: all
  mkdir -p $(INSTALL_BIN_DIR) $(INSTALL_MAN_DIR)
  cp $(PROGRAM) $(INSTALL_BIN_DIR)/$(PROGRAM)
  cp $(MAN_PAGE) $(INSTALL_MAN_DIR)/$(MAN_PAGE)

# surely there must be a way to avoid writing out these rules:
$(LINUX_ARCHIVE): ; $(WGET) $(LINUX_URL)
$(BUILDROOT_ARCHIVE): ; $(WGET) $(BUILDROOT_URL)
$(BUSYBOX_ARCHIVE): ; $(WGET) $(BUSYBOX_URL)
$(E2FSPROGS_ARCHIVE): ; $(WGET) $(E2FSPROGS_URL)
$(NTFSPROGS_ARCHIVE): ; $(WGET) $(NTFSPROGS_URL)
$(PARTED_ARCHIVE): ; $(WGET) $(PARTED_URL)
$(DEVMAP_ARCHIVE): ; $(WGET) $(DEVMAP_URL)
$(LVM2_ARCHIVE): ; $(WGET) $(LVM2_URL)
$(GENEXT2FS_ARCHIVE): ; $(WGET) $(GENEXT2FS_URL)
$(GENEXT2FS_PATCH): ; $(WGET) $(GENEXT2FS_PATCH_URL)
$(MTOOLS_ARCHIVE): ; $(WGET) $(MTOOLS_URL)
$(SYSLINUX_ARCHIVE): ; $(WGET) $(SYSLINUX_URL)
$(CDRTOOLS_ARCHIVE): ; $(WGET) $(CDRTOOLS_URL)

clean:
  [ ! -S mnt/dev/log ] || umount mnt/dev
  [ ! -d mnt/proc/1 ] || umount mnt/proc
  [ ! -d mnt/sys/block ] || umount mnt/sys
  rm -fr $(PKG_DIRS) symbols floppy* cd* root* toast-linux* $(FROMCONF) $(FROMCONF2) smallk largek sbin tmp mnt chroot *.log palette.ppm moreroot logo.lss

vmclean:
  rm -f *.vm* *.sav nvram* vmware.log

cleaner: clean vmclean
  rm -fr *.tar.gz *.tar.bz2 *.tgz *.diff.gz precompiled

distclean: cleaner
  rm -f Makefile

.DELETE_ON_ERROR:

$(LINUX_DIR)/ok: $(LINUX_ARCHIVE) smartcat
  rm -fr $(LINUX_DIR)
  ./smartcat $< | tar x
  touch $@

%/.config: $(LINUX_DIR)/ok linux-config-%
  rm -fr $*
  mkdir $*
  cat linux-config-$* > $@
  yes '' | $(MAKE) -C $(LINUX_DIR) O=$(CURDIR)/$* oldconfig dep
  touch $@

%/$(KPATH): %/.config
  $(MAKE) -C $(LINUX_DIR) O=$(CURDIR)/$* bzImage

%-modules: %/$(KPATH)
  rm -fr $@
  $(MAKE) -C $(LINUX_DIR) O=$(CURDIR)/$* modules modules_install INSTALL_MOD_PATH=$(CURDIR)/$@

%-modsize: %-modules
  cd $*-modules/lib/modules/*/kernel/drivers; ls -lS `find -name '*.ko'`

$(BUILDROOT_DIR)/.config: $(BUILDROOT_ARCHIVE) buildroot-config smartcat
  rm -fr $(BUILDROOT_DIR)
  ./smartcat $< | tar x
  ln -s .. $(BUILDROOT_DIR)/dl
  cp buildroot-config $@
  yes '' | $(MAKE) -C $(BUILDROOT_DIR) oldconfig
  touch $@

$(BUILDROOT_DIR)/ok: $(BUILDROOT_DIR)/.config
  yes '' | $(MAKE) -C $(BUILDROOT_DIR) all
  touch $@

$(BUSYBOX_DIR)/.config: $(BUSYBOX_ARCHIVE) busybox-config $(BUILDROOT_DIR)/ok smartcat
  rm -fr $(BUSYBOX_DIR)
  ./smartcat $< | tar x
  perl -pe 's!^(CROSS_COMPILER_PREFIX=").*(")!$$1$(CROSS_BIN_DIR)/$$2!' busybox-config > $@
  yes '' | $(MAKE) -C $(BUSYBOX_DIR) oldconfig
  touch $@

$(BUSYBOX): $(BUSYBOX_DIR)/.config
  $(MAKE) -C $(BUSYBOX_DIR) all

$(TUNE2FS): $(E2FSPROGS_ARCHIVE) $(BUILDROOT_DIR)/ok smartcat
  rm -fr $(E2FSPROGS_DIR)
  ./smartcat $< | tar x
  (cd $(E2FSPROGS_DIR) && ./configure --with-cc=$(CROSS_BIN_DIR)/gcc --with-linker=$(CROSS_BIN_DIR)/ld --with-ccopts=-Os --disable-{nls,evms,swapfs})
  $(MAKE) -C $(E2FSPROGS_DIR)
  strip $@

$(E2FSCK) $(RESIZE2FS): $(TUNE2FS)
  strip $@

$(NTFSRESIZE): $(NTFSPROGS_ARCHIVE) $(BUILDROOT_DIR)/ok smartcat
  rm -fr $(NTFSPROGS_DIR)
  ./smartcat $< | tar x
  (cd $(NTFSPROGS_DIR) && CC=$(CROSS_BIN_DIR)/gcc CFLAGS="-static -Os" ./configure --disable-shared && $(MAKE))
  strip $@

$(PARTED): $(PARTED_ARCHIVE) $(BUILDROOT_DIR)/ok smartcat
  rm -fr $(PARTED_DIR)
  ./smartcat $< | tar x
  perl -p -i -e 's!(\#include <libintl.h>)!/* $1 */!' $(PARTED_DIR)/libparted/filesys.c
  cd $(PARTED_DIR) && CC=$(CROSS_BIN_DIR)/gcc CFLAGS="-static -Os" CPPFLAGS="-I$(CURDIR)/$(E2FSPROGS_DIR)/lib" LDFLAGS="-L$(CURDIR)/$(E2FSPROGS_DIR)/lib" ./configure --without-readline --disable-shared --disable-nls --disable-dynamic-loading --disable-Werror
  $(MAKE) -C $(PARTED_DIR)
  strip $@

$(DEVMAP): $(DEVMAP_ARCHIVE) $(BUILDROOT_DIR)/ok smartcat
  rm -fr $(DEVMAP_DIR)
  mkdir $(DEVMAP_DIR)
  ./smartcat $< | tar x -C $(DEVMAP_DIR)
  mv $(DEVMAP_DIR)/*/* $(DEVMAP_DIR)/
  set -e; cd $(DEVMAP_DIR); ./configure --disable-shared CC="$(CROSS_BIN_DIR)/gcc -static -Os"; $(MAKE) lib

$(LVM2): $(LVM2_ARCHIVE) $(DEVMAP) $(BUILDROOT_DIR)/ok smartcat
  rm -fr $(LVM2_DIR)
  mkdir $(LVM2_DIR)
  ./smartcat $< | tar x -C $(LVM2_DIR)
  mv $(LVM2_DIR)/*/* $(LVM2_DIR)/
  perl -p -i -e 's/-O2/-Os/g' $(LVM2_DIR)/make.tmpl.in
  rm -f $(DEVMAP:.a=.so)
  set -e; cd $(LVM2_DIR); export CPATH="$(CURDIR)/$(DEVMAP_DIR)/include"; ./configure --host=i386-pc-linux-gnu CC="$(CROSS_BIN_DIR)/gcc -Os -L$(CURDIR)/$(dir $(DEVMAP))"; $(MAKE) DESTDIR=dummy
  strip $@

symbols: $(BUSYBOX) $(E2FSCK) $(TUNE2FS) $(RESIZE2FS) $(NTFSRESIZE) $(PARTED) $(LVM2)
  $(CROSS_BIN_DIR)/nm -Dp $^ | perl -lne '/.{8} [BUV] (.+)/ && print "-u $$1"' | sort -u > $@ 

Makefile $(FROMCONF): !CONFIGURE!
  !CONFIGURE! $@

# these depend on configure, but we pretend they don't to speed things up:
$(FROMCONF2):
  !CONFIGURE! $@

root: symbols !CONFIGURE!
  rm -fr $@
  !CONFIGURE! $@
  mkdir -p $@/{root,proc,sys,tmp,media/floppy,media/cdrom,mnt,var/run}
  ln -s . $@/usr
  install -D $(CROSS_LIB_DIR)/ld-uClibc.so.0 $@/lib/ld-uClibc.so.0
  install -D $(CROSS_LIB_DIR)/libdl.so.0 $@/lib/libdl.so.0
  install -D $(CROSS_LIB_DIR)/libgcc_s.so.1 $@/lib/libgcc_s.so.1
  gcc -s -nostdlib -Wl,-warn-common -shared -o $@/lib/libc.so.0 `cat symbols` $(CROSS_LIB_DIR)/libc.a
  $(MAKE) -C $(BUSYBOX_DIR) PREFIX=$(CURDIR)/$@ install
#  install -D $(E2FSCK) $@/sbin/e2fsck
  install -D $(TUNE2FS) $@/sbin/tune2fs
#  install -D $(RESIZE2FS) $@/sbin/resize2fs
#  install -D $(NTFSRESIZE) $@/sbin/ntfsresize
  install -D $(PARTED) $@/sbin/parted
  install -D $(LVM2) $@/sbin/lvm
  for i in `cat $(LVM2_DIR)/tools/.commands`; do ln -s lvm $@/sbin/$$i; done

$(GENEXT2FS): $(GENEXT2FS_ARCHIVE) $(GENEXT2FS_PATCH) smartcat
  rm -fr $(GENEXT2FS_DIR)
  ./smartcat $< | tar x
  ./smartcat $(GENEXT2FS_PATCH) | patch -d $(GENEXT2FS_DIR) -p1
  $(MAKE) -C $(GENEXT2FS_DIR)

$(MFORMAT) $(MCOPY) $(MDIR): $(MTOOLS_ARCHIVE) smartcat
  rm -fr $(MTOOLS_DIR)
  ./smartcat $< | tar x
  cd $(MTOOLS_DIR) && ./configure
  $(MAKE) -C $(MTOOLS_DIR)

$(SYSLINUX) $(ISOLINUX): $(SYSLINUX_ARCHIVE) smartcat
  rm -fr $(SYSLINUX_DIR)
  ./smartcat $< | tar x
  touch $(SYSLINUX) $(ISOLINUX)

$(MKISOFS): $(CDRTOOLS_ARCHIVE) smartcat
  rm -fr $(CDRTOOLS_DIR)
  ./smartcat $< | tar x
  $(MAKE) -C $(CDRTOOLS_DIR)/mkisofs
  cp $(CDRTOOLS_DIR)/mkisofs/OBJ/*/mkisofs $@

rootfs: root dev $(GENEXT2FS)
  rm -f $@
  $(GENEXT2FS) -d root -f dev -b $(ROOTFS_BLOCKS) -i $(ROOTFS_INODES) $@

floppy: $(SMALLK) rootfs.gz !CONFIGURE!
  rm -fr $@
  !CONFIGURE! $@
  cp $(SMALLK) $@/linux
  cp rootfs.gz $@/initrd

moreroot: !CONFIGURE!
  rm -fr $@
  mkdir $@
  cp !CONFIGURE! $@/configure

precompiled: chroot
  rm -fr $@
  mkdir $@
  set -e; for i in `cd mnt/toast/pkg && echo *`; do tar cjf $@/$$i.tar.bz2 --owner=0 --group=0 -C mnt toast/pkg/$$i; (cd $@; du $$i.tar.bz2); done

cd: $(LARGEK) $(ISOLINUX) rootfs.gz logo.lss moreroot precompiled
  rm -fr $@
  !CONFIGURE! $@
  cp logo.lss $@/isolinux/logo.lss
  cp $(LARGEK) $@/isolinux/linux
  cp $(ISOLINUX) $@/isolinux/isolinux.bin
  cp rootfs.gz $@/isolinux/initrd
  mkdir -p $@/toast-linux
  tar cjf $@/toast-linux/ram.tar.bz2 --owner=0 --group=0 -C moreroot .
  ln precompiled/* $@/toast-linux/

floppy.img: floppy $(MFORMAT) $(SYSLINUX) $(MCOPY) $(MDIR)
  rm -f $@
  $(MFORMAT) -C -v "toast linux" -f $(FLOPPY_SIZE) -r 1 -i $@ ::
  $(SYSLINUX) $@
  $(MCOPY) -i $@ -s $</* ::
  $(MDIR) -a -i $@ ::

floppy.iso: floppy.img $(MKISOFS)
  $(MKISOFS) -o $@ -b $< $<

%.iso: % $(MKISOFS)
  $(MKISOFS) -o $@ -r -b isolinux/isolinux.bin -c isolinux/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table $<

palette.ppm: logotoppm
  ./logotoppm --palette > $@

logo.lss: floppy logotoppm palette.ppm $(SYSLINUX)
  ./logotoppm floppy/logo | pnmcrop | pnmscale 1.25 | pnmrotate 4 | pnmpad -width 640 -height 480 | pnmremap -fs -mapfile=palette.ppm | $(SYSLINUX_DIR)/ppmtolss16 \#000000=0 \#aaaaaa=7 \#ffffff=15 > $@

toast-linux: toast-linux.stub floppy.iso.gz
  rm -f $@
  cat $^ > $@
  chmod +x $@

toast-linux.1: toast-linux.stub
  pod2man $< > $@

chroot: sbin/setup
  chroot / true
  [ ! -S mnt/dev/log ] || umount mnt/dev
  [ ! -d mnt/proc/1 ] || umount mnt/proc
  [ ! -d mnt/sys/block ] || umount mnt/sys
  rm -fr tmp mnt
  mkdir tmp
  TOAST_NICE=5 sbin/setup
  touch $@

vmware: vmware-floppy

vmware-floppy: floppy.img floppy.iso vmclean floppy.vmx
  vmware-vdiskmanager -c -a buslogic -s 16gb -t 1 toast.vmdk
  vmware -x floppy.vmx

vmware-cd: cd.iso vmclean cd.vmx
  vmware-vdiskmanager -c -a buslogic -s 16gb -t 1 toast.vmdk
  vmware -x cd.vmx

config-linux-%: %/.config
  $(MAKE) -C $(LINUX_DIR) O=$(CURDIR)/$* menuconfig
  cp $< linux-config-$*

config-buildroot: $(BUILDROOT_DIR)/.config
  $(MAKE) -C $(BUILDROOT_DIR) menuconfig
  cp $< buildroot-config

config-busybox: $(BUSYBOX_DIR)/.config
  $(MAKE) -C $(BUSYBOX_DIR) menuconfig
  cp $< busybox-config

%.bz2: %
  bzip2 -kf9 $<

%.gz: %
  gzip -9 -c $< > $@

--- FILE toast-linux.stub ---
#!/usr/bin/perl

=head1 NAME

toast-linux - create toast linux install floppy or CD

=head1 SYNOPSIS

  toast-linux [--floppy|--cd] [--append=CMD] [[--outfile=]FILE]
  toast-linux --help
  toast-linux --man

=head1 DESCRIPTION

TODO: describe toast linux in general, what the installer does, and what
this program does

=head1 AVAILABILITY

TODO: link to source and precompiled versions
TODO: figure out what kind of license I can use for this thing (GPL?)

=head1 BUGS

Known bugs:

  - is not finished
  - does not actually work
  - missing documentation
  - no web page

Wish list:

  - this program should be able to write a floppy or CD in one step
  - this program should be usable under ActiveState Perl (Windows)
  - this program should be able to configure defaults for installer
  - install disk should double as a rescue disk including e2fsck
  - install disk should automatically resize FAT and NTFS partitions

=head1 SEE ALSO

TODO: refer to toast itself, some other distributions like Gentoo
and Debian, some of the constitutent software like BusyBox

=head1 AUTHOR

Jacques Frechet

=cut

use warnings;
use strict;
use Getopt::Long;
use Pod::Usage;

sub usage() { pod2usage(2); die }

my($floppy, $outfile, $append);
{
  my($help, $man, $cd);
  usage unless GetOptions
  (
    "help|?" => \$help,
    "man" => \$man,
    "floppy|fd" => \$floppy,
    "cd|iso" => \$cd,
    "outfile=s" => \$outfile,
    "append=s" => \$append,
  );

  pod2usage(1) if $help;
  pod2usage(-exitstatus => 0, -verbose => 2) if $man;

  usage if $floppy && $cd;
  $outfile = shift unless defined($outfile);
  usage if @ARGV;
  $outfile = "/dev/fd0" if !defined($outfile) && $floppy;
  $cd = 1 if !defined($floppy) && !defined($cd) && defined($outfile) &&
      $outfile =~ /\.iso$/i;
  $floppy = 1 if !defined($floppy) && !defined($cd);

  usage unless defined($outfile);
  $outfile = undef if $outfile eq "-";
}

open(STDOUT, ">", $outfile) || die("open $outfile: $!") if defined($outfile);

my($oldcfg) = << 'EOF';
!OLDCFG!
EOF
$oldcfg =~ s/\n/\r\n/g;
my($len) = length($oldcfg);
die("len=$len") unless $len == 512;

my($newcfg);
if(defined($append))
{
  $newcfg = $oldcfg;
  $newcfg =~ s/^#[^\r\n]*\r?\n//mg;
  die unless $newcfg =~ s/^(append [^\r\n]+)(\r\n)/$1 $append$2/mi;
  die unless length($newcfg) <= 512;
  $newcfg .= "# pad to fill one 512-byte sector\n" while length($newcfg) < 512;
  substr($newcfg, 510) = "\r\n";
  $newcfg =~s/\r(\r\n$)/#$1/;
  die unless length($newcfg) == 512;
}

if($floppy || defined($newcfg))
{
  my($pid) = open(STDOUT, "|-");
  die("fork: $!") unless defined($pid);
  binmode(STDOUT);
  if(!$pid)
  {
    binmode(STDIN);
    my($on, $i, $rc, $buf) = (!$floppy, 0);
    while($rc = read(STDIN, $buf = "", 512, 0))
    {
      next unless $on ||= $buf =~ /^...SYSLINUX.{32}TOAST LINUXFAT12/;
      $buf = $newcfg if defined($newcfg) && $buf eq $oldcfg;
      print($buf) || die("write: $!");
      $on &&= ++$i < 2880 if $floppy;
    }
    die("read: $!") unless defined($rc);
    die("error: wrote $i sectors") unless $i == 2880 || !$floppy;
    close(STDOUT) || die("close: $!");
    exit(0);
  }
}

open(STDOUT, "| gzip -cd") || die("spawn gzip: $!");
binmode(STDOUT);
binmode(DATA);
my($rc, $buf);
print($buf) || die("write: $!") while $rc = read(DATA, $buf = "", 8192, 0);
close(STDOUT) || die("close: $!");

__DATA__

--- FILE dev ---
drwx                    /dev
crw-    4,      0       /dev/tty0
crw-    4,      1       /dev/tty1
crw-    4,      2       /dev/tty2
crw-    4,      3       /dev/tty3
crw-    4,      4       /dev/tty4
crw-    4,      5       /dev/tty5
crw-    5,      0       /dev/tty
crw-    5,      1       /dev/console

--- FILE smartcat ---
#!/bin/sh
for file; do
  case "$file" in
    *gz) gzip -cd "$file";;
    *.bz2) bzip2 -cd "$file";;
    *) cat "$file";;
  esac
done

--- FILE logotoppm ---
#!/usr/bin/perl

use warnings;
use strict;

my(@palette) =
(
  "\x00\x00\x00",
  "\x00\x00\xaa",
  "\x00\xaa\x00",
  "\x00\xaa\xaa",
  "\xaa\x00\x00",
  "\xaa\x00\xaa",
  "\xaa\x55\x00",
  "\xaa\xaa\xaa",
  "\x55\x55\x55",
  "\x55\x55\xff",
  "\x55\xff\x55",
  "\x55\xff\xff",
  "\xff\x55\x55",
  "\xff\x55\xff",
  "\xff\xff\x55",
  "\xff\xff\xff",
);

if(@ARGV && $ARGV[0] eq "--palette")
{
  print("P6\n16 1\n255\n", @palette);
  exit(0);
}

my($small) = "ailnostux";
my($large) = q(

           XX     XXX                              X
           XX      XX                             XX
                   XX                             XX
 XXXX     XXX      XX   XX XXX   XXXXX   XXXXX  XXXXXX  XX  XX  XX    XX
    XX     XX      XX    XX  XX XX   XX XX   XX   XX    XX  XX   XX  XX
 XXXXX     XX      XX    XX  XX XX   XX  XX       XX    XX  XX    XXXX
XX  XX     XX      XX    XX  XX XX   XX   XXX     XX    XX  XX     XX
XX  XX     XX      XX    XX  XX XX   XX     XX    XX    XX  XX    XXXX
XX  XX     XX      XX    XX  XX XX   XX XX   XX   XX X  XX  XX   XX  XX
 XXX XX   XXXX    XXXX   XX  XX  XXXXX   XXXXX     XX    XXX XX XX    XX

);
my(@font) = split(/\n/, $large);
push(@font, "") while scalar(@font) < 16;
$small .= " ";
for(@font)
{
  $_ .= " " while length($_) < length($small) * 8;
}
$small .= "\xb1";
my($grid) = "X " x 4;
for(@font)
{
  $_ .= $grid;
  $grid =~ s/(.)(.)/$2$1/g;
}

my($line) = 0;
$/ = undef;
my($input) = <>;
$input =~ s/.*\x0c//;
$input .= "\n" x 26;

print("P6\n720 400\n255\n");
my(@obuf) = map("", 1..16);
my($r, $fg, $bg) = (0, 7, 0);
while($input =~ /(\x0f..|.)/sg)
{
  last if $r >= 25;

  my($char) = $1;
  if($char =~ /\x0f(.)(.)/)
  {
    $bg = hex($1);
    $fg = hex($2);
    next;
  }

  my($idx) = index($small, $char);

  if($idx == -1 || length($obuf[0]) == 720*3)
  {
    for(@obuf)
    {
      $_ .= "\x00" while length($_) < 720*3;
    }
    print(@obuf);
    @obuf = map("", 1..16);
    ++$r;
    next if $idx == -1;
  }

  for(0..15)
  {
    my($pixels) = substr($font[$_], 8 * $idx, 8) . " ";
    $pixels =~ s/(.)/$palette[$1 eq " " ? $bg : $fg]/ge;
    $obuf[$_] .= $pixels;
  }
}

--- FILE mkhd ---
#!/usr/bin/perl

use warnings;
use strict;

my($outfile, $cylinders, $heads, $sectors) = @ARGV;
$cylinders || die("usage: $0 outfile cylinders [heads] [sectors]\n");
$heads ||= 16;
$sectors ||= 63;

my($size) = $cylinders * $heads * $sectors * 512;

local(*HD);
open(HD, ">", $outfile) || die("open $outfile: $!");
truncate(HD, $size) || die("truncate $outfile: $!");
close(HD) || die("close $outfile: $!");

--- FILE floppy.vmx ---
#!/usr/bin/vmware
config.version = "7"
virtualHW.version = "3"
displayName = "toast linux"
guestOS = "other26xlinux"
memsize = "256"
scsi0.present = "TRUE"
scsi0:0.present = "TRUE"
scsi0:0.fileName = "toast.vmdk"
scsi0:0.mode = "undoable"
ide1:0.present = "TRUE"
ide1:0.fileName = "floppy.iso"
ide1:0.deviceType = "cdrom-image"
ide1:0.startConnected = "FALSE"
floppy0.fileName = "floppy.img"
floppy0.fileType = "file"
floppy0.startConnected = "TRUE"
Ethernet0.present = "TRUE"
sound.present = "FALSE"
disable_acceleration = "TRUE"

--- FILE cd.vmx ---
#!/usr/bin/vmware
config.version = "7"
virtualHW.version = "3"
displayName = "toast linux"
guestOS = "other26xlinux"
memsize = "256"
scsi0.present = "TRUE"
scsi0:0.present = "TRUE"
scsi0:0.fileName = "toast.vmdk"
scsi0:0.mode = "undoable"
ide1:0.present = "TRUE"
ide1:0.fileName = "cd.iso"
ide1:0.deviceType = "cdrom-image"
ide1:0.startConnected = "TRUE"
floppy0.fileName = "floppy.img"
floppy0.fileType = "file"
floppy0.startConnected = "FALSE"
Ethernet0.present = "TRUE"
sound.present = "FALSE"
disable_acceleration = "TRUE"

--- FILE floppy/syslinux.cfg ---
display logo
prompt 1
timeout 200
f1 help
append initrd=initrd root=/dev/ram0 rw vga=ext

--- FILE cd/isolinux/isolinux.cfg ---
display logo
prompt 1
timeout 200
f1 help
append initrd=initrd root=/dev/ram0 rw vga=ext

--- FILE floppy/logo ---
^L

                          ^O6e        ^O07            ^O6e        ^O07
                        ^O6e  %%%%%%%%            %%%%%%%%  ^O07
                      ^O6e  %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%  ^O07
                      ^O6e  %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%  ^O07
                      ^O6e  %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%  ^O07
                        ^O6e  %%%%%%%%%%%%%%%%%%%%%%%%%%%%  ^O07
                        ^O6e  %%%%%%%%%%%%%%%%%%%%%%%%%%%%  ^O07
                        ^O6e  %%%%%%%%%%%%%%%%%%%%%%%%%%%%  ^O07
                        ^O6e  %%%%%%%%%%%%%%%%%%%%%%%%%%%%  ^O07
                        ^O6e  %%%%%%%%%%%%%%%%%%%%%%%%%%%%  ^O07
                        ^O6e  %%%%%%%%%%%%%%%%%%%%%%%%%%%%  ^O07
                        ^O6e  %%%%%%%%%%%%%%%%%%%%%%%%%%%%  ^O07
                        ^O6e  %%%%%%%%%%%%%%%%%%%%%%%%%%%%  ^O07
                        ^O6e  %%%%%%%%%%%%%%%%%%%%%%%%%%%%  ^O07
                        ^O6e  %%%%%%%%%%%%%%%%%%%%%%%%%%%%  ^O07
                          ^O6e                            ^O07


                                  toast linux


Press ^O0fF1^O07 within 20 seconds, or risk losing the contents of all hard disks!

--- FILE cd/isolinux/logo ---
^Xlogo.lss
Press ^O0fF1^O07 within 20 seconds, or risk losing the contents of all hard disks!

--- FILE floppy/help ---
^LBy default, the network will be configured automatically using DHCP.
All available network interfaces will be tried sequentially, starting
with eth0; the first one that responds to DHCP will be used.  You can
override this behavior with the IF parameter:

  linux IF=eth1,eth0,eth3        [try only those interfaces in order given]

You can specify a static IP configuration as follows:

  linux IP=192.168.0.100 GW=192.168.0.1

Replace "192.168.0.100" with the IP address you want to use, and
"192.168.0.1" with your gateway or router's IP address.  The IF parameter
given above still applies; the first interface that can successfully
ping the given gateway will be used.  Other possible options include:

  NM=255.255.255.0      netmask (default: compute from IP by class)
  DNS=205.217.153.34    DNS server list (default: ofb.net)

These parameters control disk partitioning:

  DISKS=hda,hdb,sda     install on specified disks only
  DESTROY=yes           overwrite existing disk contents

--- FILE cd/isolinux/help ---
Help for CD version will go here, maybe.

--- FILE root/etc/hosts ---
127.0.0.1 localhost

--- FILE root/etc/resolv.conf ---
nameserver 205.217.153.34

--- FILE root/etc/TZ ---
PST8PDT

--- FILE root/etc/lvm/lvm.conf ---
devices { sysfs_scan=0 }

--- FILE root/etc/fstab ---
/dev/ram0 / ext2 rw 0 0
proc /proc proc rw 0 0
sys /sys sysfs rw 0 0
tmp /tmp tmpfs rw 0 0
/dev/fd0 /media/floppy vfat rw,noauto,sync 0 0

--- FILE root/etc/mtab ---
/dev/ram0 / ext2 rw 0 0

--- FILE root/etc/profile ---
PS1='\h:\w\$ '

--- FILE root/etc/inittab ---
::sysinit:/etc/init.d/rc.start
::respawn:/etc/init.d/rc.main
::shutdown:/etc/init.d/rc.stop
::ctrlaltdel:/sbin/reboot

--- FILE root/etc/init.d/rc.start ---
#!/bin/sh -e
devices
mount -a
ifconfig lo 127.0.0.1
hostname localhost
if cdrom; then
  tar xjf /media/cdrom/toast-linux/ram.tar.bz2
  network || true
else
  network
  wget http://toastball.net/toast-linux-tmp/configure
fi
sh ./configure !VERSION!

--- FILE root/etc/init.d/rc.stop ---
#!/bin/sh
swapoff -a
umount -a -r

--- FILE root/etc/init.d/rc.main ---
#!/bin/sh
[ -x /sbin/setup ] && setup
sh --login

--- FILE root/sbin/network ---
#!/bin/sh

echo "Configuring network."

IF="`echo \"$IF\" | sed -e 's/[^a-z0-9]/ /g; s/^  *//; s/  *$//'`"
IP="`echo \"$IP\" | sed -e 's/[^0-9\.]/ /g; s/^  *//; s/  *$//'`"
NM="`echo \"$NM\" | sed -e 's/[^0-9\.]/ /g; s/^  *//; s/  *$//'`"
GW="`echo \"$GW\" | sed -e 's/[^0-9\.]/ /g; s/^  *//; s/  *$//'`"
DNS="`echo \"$DNS\" | sed -e 's/[^0-9\.]/ /g; s/^  *//; s/  *$//'`"

if [ -z "$IF" ]; then
  IF=`cd /sys/class/net && echo eth*`
  if [ "$IF" = "eth*" ]; then
    echo "No supported network devices found."
    exit 1
  fi
fi

if [ -n "$IP" ]; then
  if [ -z "$NM" ]; then
    NETMASK=""
    eval `ipcalc -sm "$IP"`
    NM="$NETMASK"
  fi
  if [ -z "$GW" ]; then
    NETWORK=""
    BROADCAST=""
    eval `ipcalc -sn "$IP" $NM`
    eval `ipcalc -sb "$IP" $NM`
    # TODO: guess gateway from NETWORK and/or BROADCAST
  fi
fi

[ -n "$NM" ] && mask="netmask $NM"

if [ -n "$DNS" ]; then
  : > /etc/resolv.tmp
  for i in $DNS; do
    echo "nameserver $i" >> /etc/resolv.tmp
  done
  mv /etc/resolv.tmp /etc/resolv.conf
fi

for if in $IF; do
  if [ -z "$IP" ]; then
    udhcpc -n -i "$if" && exit 0
  elif ifconfig "$if" "$IP" $mask; then
    [ -z "$GW" ] && exit 0
    for gw in $GW; do
      if ping -c 3 "$gw"; then
        for j in $GW; do
          route add default gw "$j" dev "$if"
        done
        HOSTNAME="`hostname`"
        eval `ipcalc -sh "$IP"`
        [ -n "$HOSTNAME" ] && hostname "$HOSTNAME"
        exit 0
      fi
    done
    ifconfig "$if" down
  fi
done

echo "Unable to configure network."
exit 1

--- FILE root/sbin/cdrom ---
#!/bin/sh
umount /media/cdrom 2>/dev/null
cd /sys/block
for i in *; do
  case "$i" in
    dm*|fd*|loop*|ram*|md*) ;;
    *)
      mount -r -t iso9660 "/dev/$i" /media/cdrom 2>/dev/null
      if [ -d /media/cdrom/toast-linux ]; then
        echo "Found cdrom: $i"
        ln -s "$i" /dev/cdrom
        exit 0
      fi
      umount /media/cdrom 2>/dev/null
      ;;
  esac
done
echo "No cdrom detected."
exit 1

--- FILE root/share/udhcpc/default.script ---
#!/bin/sh

case "$1" in
  deconfig)
    ifconfig "$interface" 0.0.0.0
    ;;
  nak|leasefail)
    ifconfig "$interface" down
    ;;
  bound|renew)
    mask=""
    [ -n "$NM" ] && mask="netmask $NM"
    [ -n "$subnet" ] && mask="netmask $subnet"
    ifconfig "$interface" "$ip" $mask || exit $?
    while route del default gw 0.0.0.0 dev "$interface"; do :; done 2>/dev/null
    if [ -n "$router" ]; then
      for r in $router; do route add default gw "$r" dev "$interface"; done
    fi
    if [ -n "$dns" ]; then
      : > /etc/resolv.tmp
      for n in $dns; do echo "nameserver $n" >> /etc/resolv.tmp; done
    else
      cp /etc/resolv.conf /etc/resolv.tmp
    fi
    [ -n "$domain" ] && echo "domain $domain" >> /etc/resolv.tmp
    mv /etc/resolv.tmp /etc/resolv.conf
    if [ -n "$hostname" ]; then
      hostname "$hostname"
    else
      HOSTNAME=`hostname`
      eval `ipcalc -sh "$ip"`
      [ -n "$HOSTNAME" ] && hostname "$HOSTNAME"
    fi
    ;;
  *)
    echo "unexpected arguments: $*" >&2
    exit 1
    ;;
esac

exit 0

--- FILE root/sbin/devices ---
#!/bin/sh

process()
{
  if [ -r "$1" ]; then
    IFS=: read major minor < "$1"
    name="`dirname $1`"; name="/dev/`basename $name`"
    [ -b "$name" -o -c "$name" ] || mknod "$name" "$type" "$major" "$minor"
  fi
}

mkdir -p /sys /dev
[ ! -d /sys/block ] && mount -t sysfs sys /sys

type=b
for i in /sys/block/*/dev; do process "$i"; done
for i in /sys/block/*/*/dev; do process "$i"; done
type=c
for i in /sys/class/*/*/dev; do process "$i"; done

if [ -c /dev/device-mapper -a ! -d /dev/mapper ]; then
  mkdir -p /dev/mapper
  ln -sf ../device-mapper /dev/mapper/control
fi

[ -p /dev/initctl ] || mknod /dev/initctl p

chmod 666 /dev/null

--- FILE linux-config-smallk ---
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.10
# Sat Feb  5 00:43:40 2005
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y

#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
# CONFIG_KOBJECT_UEVENT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_EMBEDDED=y
# CONFIG_KALLSYMS is not set
CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set

#
# Loadable module support
#
# CONFIG_MODULES is not set

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
CONFIG_M386=y
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_L1_CACHE_SHIFT=4
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_X86_PPRO_FENCE=y
CONFIG_X86_F00F_BUG=y
# CONFIG_HPET_TIMER is not set
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
# CONFIG_X86_UP_APIC is not set
# CONFIG_X86_MCE is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_MTRR is not set
# CONFIG_REGPARM is not set

#
# Power management options (ACPI, APM)
#
# CONFIG_PM is not set

#
# ACPI (Advanced Configuration and Power Interface) Support
#
# CONFIG_ACPI is not set
CONFIG_ACPI_BLACKLIST_YEAR=0

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_LEGACY_PROC is not set
# CONFIG_PCI_NAMES is not set
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set

#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set

#
# PC-card bridges
#
CONFIG_PCMCIA_PROBE=y

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
# CONFIG_PARPORT is not set

#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_ISAPNP=y
# CONFIG_PNPBIOS is not set

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set

#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
CONFIG_SCSI_BUSLOGIC=y
CONFIG_SCSI_OMIT_FLASHPOINT=y
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA6322 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_ZERO is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
CONFIG_NET_VENDOR_3COM=y
# CONFIG_EL1 is not set
# CONFIG_EL2 is not set
# CONFIG_ELPLUS is not set
# CONFIG_EL16 is not set
CONFIG_EL3=y
# CONFIG_3C515 is not set
CONFIG_VORTEX=y
# CONFIG_TYPHOON is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set

#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_DE2104X=y
CONFIG_TULIP=y
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=y
CONFIG_WINBOND_840=y
CONFIG_DM9102=y
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
CONFIG_HP100=y
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
CONFIG_AMD8111_ETH=y
# CONFIG_AMD8111E_NAPI is not set
CONFIG_ADAPTEC_STARFIRE=y
# CONFIG_ADAPTEC_STARFIRE_NAPI is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
CONFIG_B44=y
CONFIG_FORCEDETH=y
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
CONFIG_EEPRO100=y
# CONFIG_EEPRO100_PIO is not set
# CONFIG_E100 is not set
CONFIG_FEALNX=y
CONFIG_NATSEMI=y
CONFIG_NE2K_PCI=y
CONFIG_8139CP=y
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_SIS900=y
CONFIG_EPIC100=y
CONFIG_SUNDANCE=y
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_TLAN=y
CONFIG_VIA_RHINE=y
# CONFIG_VIA_RHINE_MMIO is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_RAW is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set

#
# Non-8250 serial port support
#
# CONFIG_UNIX98_PTYS is not set
# CONFIG_LEGACY_PTYS is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set

#
# I2C support
#
# CONFIG_I2C is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
# CONFIG_FB is not set
CONFIG_VIDEO_SELECT=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y

#
# Sound
#
# CONFIG_SOUND is not set

#
# USB support
#
# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
# CONFIG_MMC is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_EXPORTFS is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_EARLY_PRINTK is not set
# CONFIG_4KSTACKS is not set

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
# CONFIG_CRYPTO is not set

#
# Library routines
#
# CONFIG_CRC_CCITT is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y

--- FILE linux-config-largek ---
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.10
# Mon Feb 21 12:03:33 2005
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y

#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set

#
# Loadable module support
#
CONFIG_MODULES=y
# CONFIG_MODULE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
CONFIG_M386=y
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_X86_PPRO_FENCE=y
CONFIG_X86_F00F_BUG=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_HPET_TIMER=y
# CONFIG_HPET_EMULATE_RTC is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_PREEMPT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_HIGHMEM=y
# CONFIG_HIGHPTE is not set
CONFIG_MATH_EMULATION=y
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_IRQBALANCE=y
# CONFIG_REGPARM is not set

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION=""

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
CONFIG_ACPI_IBM=m
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y

#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set

#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
# CONFIG_PCMCIA_OBSOLETE is not set
CONFIG_PCMCIA=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_PD6729=y
CONFIG_I82092=y
CONFIG_I82365=y
CONFIG_TCIC=y
CONFIG_PCMCIA_PROBE=y

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_CML1=y
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_OTHER is not set
# CONFIG_PARPORT_1284 is not set

#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
# CONFIG_ISAPNP is not set
# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_LBD=y
# CONFIG_CDROM_PKTCDVD is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set

#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
CONFIG_SCSI_DPT_I2O=m
# CONFIG_SCSI_IN2000 is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_SCSI_SATA=y
CONFIG_SCSI_SATA_AHCI=y
CONFIG_SCSI_SATA_SVW=y
CONFIG_SCSI_ATA_PIIX=y
CONFIG_SCSI_SATA_NV=y
CONFIG_SCSI_SATA_PROMISE=y
CONFIG_SCSI_SATA_SX4=y
CONFIG_SCSI_SATA_SIL=y
CONFIG_SCSI_SATA_SIS=y
CONFIG_SCSI_SATA_ULI=y
CONFIG_SCSI_SATA_VIA=y
CONFIG_SCSI_SATA_VITESSE=y
CONFIG_SCSI_BUSLOGIC=y
# CONFIG_SCSI_OMIT_FLASHPOINT is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
CONFIG_SCSI_IPR=y
# CONFIG_SCSI_IPR_TRACE is not set
# CONFIG_SCSI_IPR_DUMP is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA6322 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID5=y
CONFIG_MD_RAID6=y
CONFIG_MD_MULTIPATH=y
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_MIRROR=y
CONFIG_DM_ZERO=y

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=y

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set
CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
CONFIG_IEEE1394_CONFIG_ROM_IP1394=y

#
# Device Drivers
#

#
# Texas Instruments PCILynx requires I2C
#
CONFIG_IEEE1394_OHCI1394=y

#
# Protocol Drivers
#
# CONFIG_IEEE1394_VIDEO1394 is not set
CONFIG_IEEE1394_SBP2=y
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394=y
# CONFIG_IEEE1394_DV1394 is not set
CONFIG_IEEE1394_RAWIO=y
# CONFIG_IEEE1394_CMP is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set

#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=y
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
# CONFIG_IP_NF_FTP is not set
# CONFIG_IP_NF_IRC is not set
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_AMANDA is not set
CONFIG_IP_NF_QUEUE=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_LIMIT=y
CONFIG_IP_NF_MATCH_IPRANGE=y
CONFIG_IP_NF_MATCH_MAC=y
CONFIG_IP_NF_MATCH_PKTTYPE=y
CONFIG_IP_NF_MATCH_MARK=y
CONFIG_IP_NF_MATCH_MULTIPORT=y
CONFIG_IP_NF_MATCH_TOS=y
CONFIG_IP_NF_MATCH_RECENT=y
CONFIG_IP_NF_MATCH_ECN=y
CONFIG_IP_NF_MATCH_DSCP=y
CONFIG_IP_NF_MATCH_AH_ESP=y
CONFIG_IP_NF_MATCH_LENGTH=y
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_MATCH_TCPMSS=y
CONFIG_IP_NF_MATCH_HELPER=y
CONFIG_IP_NF_MATCH_STATE=y
CONFIG_IP_NF_MATCH_CONNTRACK=y
CONFIG_IP_NF_MATCH_OWNER=y
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_REALM is not set
# CONFIG_IP_NF_MATCH_SCTP is not set
# CONFIG_IP_NF_MATCH_COMMENT is not set
# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_IP_NF_TARGET_TCPMSS=y
CONFIG_IP_NF_NAT=y
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_IP_NF_TARGET_NETMAP=y
CONFIG_IP_NF_TARGET_SAME=y
# CONFIG_IP_NF_NAT_LOCAL is not set
# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_TOS=y
CONFIG_IP_NF_TARGET_ECN=y
CONFIG_IP_NF_TARGET_DSCP=y
CONFIG_IP_NF_TARGET_MARK=y
CONFIG_IP_NF_TARGET_CLASSIFY=y
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=y
CONFIG_IP_NF_ARP_MANGLE=y

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
CONFIG_BT=y
CONFIG_BT_L2CAP=y
CONFIG_BT_SCO=y
CONFIG_BT_RFCOMM=y
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=y
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=y

#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=y
CONFIG_BT_HCIUSB_SCO=y
CONFIG_BT_HCIUART=y
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_BCSP_TXCRC=y
CONFIG_BT_HCIBCM203X=y
CONFIG_BT_HCIBFUSB=y
CONFIG_BT_HCIDTL1=y
CONFIG_BT_HCIBT3C=y
CONFIG_BT_HCIBLUECARD=y
CONFIG_BT_HCIBTUART=y
CONFIG_BT_HCIVHCI=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
# CONFIG_NET_SB1000 is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL1=y
CONFIG_EL2=y
CONFIG_ELPLUS=y
CONFIG_EL16=y
CONFIG_EL3=y
CONFIG_3C515=y
CONFIG_VORTEX=y
CONFIG_TYPHOON=y
CONFIG_LANCE=y
CONFIG_NET_VENDOR_SMC=y
CONFIG_WD80x3=y
CONFIG_ULTRA=y
CONFIG_SMC9194=y
CONFIG_NET_VENDOR_RACAL=y
CONFIG_NI52=y
CONFIG_NI65=y

#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_DE2104X=y
CONFIG_TULIP=y
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=y
CONFIG_WINBOND_840=y
CONFIG_DM9102=y
CONFIG_PCMCIA_XIRCOM=y
CONFIG_AT1700=y
CONFIG_DEPCA=y
CONFIG_HP100=y
CONFIG_NET_ISA=y
# CONFIG_E2100 is not set
# CONFIG_EWRK3 is not set
# CONFIG_EEXPRESS is not set
# CONFIG_EEXPRESS_PRO is not set
# CONFIG_HPLAN_PLUS is not set
# CONFIG_HPLAN is not set
# CONFIG_LP486E is not set
# CONFIG_ETH16I is not set
CONFIG_NE2000=y
# CONFIG_ZNET is not set
# CONFIG_SEEQ8005 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
CONFIG_AMD8111_ETH=y
# CONFIG_AMD8111E_NAPI is not set
CONFIG_ADAPTEC_STARFIRE=y
# CONFIG_ADAPTEC_STARFIRE_NAPI is not set
CONFIG_AC3200=y
CONFIG_APRICOT=y
CONFIG_B44=y
CONFIG_FORCEDETH=y
CONFIG_CS89x0=y
CONFIG_DGRS=y
CONFIG_EEPRO100=y
# CONFIG_EEPRO100_PIO is not set
CONFIG_E100=y
# CONFIG_E100_NAPI is not set
CONFIG_FEALNX=y
CONFIG_NATSEMI=y
CONFIG_NE2K_PCI=y
CONFIG_8139CP=y
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_SIS900=y
CONFIG_EPIC100=y
CONFIG_SUNDANCE=y
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_TLAN=y
CONFIG_VIA_RHINE=y
# CONFIG_VIA_RHINE_MMIO is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
CONFIG_ACENIC=y
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=y
CONFIG_E1000=y
# CONFIG_E1000_NAPI is not set
CONFIG_NS83820=y
CONFIG_HAMACHI=y
CONFIG_YELLOWFIN=y
CONFIG_R8169=y
# CONFIG_R8169_NAPI is not set
CONFIG_SK98LIN=y
CONFIG_VIA_VELOCITY=y
CONFIG_TIGON3=y

#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
CONFIG_S2IO=m
# CONFIG_S2IO_NAPI is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y

#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
# CONFIG_ARLAN is not set
# CONFIG_WAVELAN is not set
# CONFIG_PCMCIA_WAVELAN is not set
# CONFIG_PCMCIA_NETWAVE is not set

#
# Wireless 802.11 Frequency Hopping cards support
#
CONFIG_PCMCIA_RAYCS=y

#
# Wireless 802.11b ISA/PCI cards support
#
CONFIG_AIRO=y
CONFIG_HERMES=y
CONFIG_PLX_HERMES=y
CONFIG_TMD_HERMES=y
CONFIG_PCI_HERMES=y
CONFIG_ATMEL=y
CONFIG_PCI_ATMEL=y

#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
CONFIG_PCMCIA_HERMES=y
CONFIG_AIRO_CS=y
CONFIG_PCMCIA_ATMEL=y
CONFIG_PCMCIA_WL3501=y

#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
CONFIG_PRISM54=y
CONFIG_NET_WIRELESS=y

#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=y
CONFIG_PCMCIA_3C574=y
CONFIG_PCMCIA_FMVJ18X=y
CONFIG_PCMCIA_PCNET=y
CONFIG_PCMCIA_NMCLAN=y
CONFIG_PCMCIA_SMC91C92=y
CONFIG_PCMCIA_XIRC2PS=y
CONFIG_PCMCIA_AXNET=y

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=y
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=y
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=y
# CONFIG_PPP_BSDCOMP is not set
CONFIG_PPPOE=y
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_PCIPS2=y
# CONFIG_SERIO_RAW is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
CONFIG_INPUT_UINPUT=y

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_CS is not set
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=y
CONFIG_AGP_ALI=m
CONFIG_AGP_ATI=m
CONFIG_AGP_AMD=m
CONFIG_AGP_AMD64=m
CONFIG_AGP_INTEL=y
CONFIG_AGP_INTEL_MCH=m
CONFIG_AGP_NVIDIA=m
CONFIG_AGP_SIS=m
CONFIG_AGP_SWORKS=m
CONFIG_AGP_VIA=m
CONFIG_AGP_EFFICEON=m
CONFIG_DRM=y
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_I810=m
CONFIG_DRM_I830=m
CONFIG_DRM_I915=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set

#
# I2C support
#
# CONFIG_I2C is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m

#
# Video For Linux
#

#
# Video Adapters
#
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set

#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_SF16FMR2 is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=y
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set

#
# Logo configuration
#
# CONFIG_LOGO is not set

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_RTCTIMER is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# ISA devices
#
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set

#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CS46XX=m
# CONFIG_SND_CS46XX_NEW_DSP is not set
CONFIG_SND_CS4281=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_KORG1212=m
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_HDSP=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_YMFPCI=m
CONFIG_SND_ALS4000=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_FM801=m
CONFIG_SND_FM801_TEA575X=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VX222=m

#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m

#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_VXP440 is not set
# CONFIG_SND_PDAUDIOCF is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set

#
# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
#
CONFIG_USB_MIDI=m
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_RW_DETECT is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set

#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
CONFIG_USB_EGALAX=m
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set

#
# USB Network Adapters
#
CONFIG_USB_CATC=y
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
CONFIG_USB_USBNET=y

#
# USB Host-to-Host Cables
#
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_GENESYS=y
CONFIG_USB_NET1080=y
CONFIG_USB_PL2301=y
CONFIG_USB_KC2190=y

#
# Intelligent USB Devices/Gadgets
#
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_ZAURUS=y
CONFIG_USB_CDCETHER=y

#
# USB Network Adapters
#
CONFIG_USB_AX8817X=y

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
CONFIG_USB_CYTHERM=m
# CONFIG_USB_PHIDGETKIT is not set
CONFIG_USB_PHIDGETSERVO=m
# CONFIG_USB_TEST is not set

#
# USB ATM/DSL drivers
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
# CONFIG_MMC is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
CONFIG_MINIX_FS=y
CONFIG_ROMFS_FS=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
# CONFIG_EXPORTFS is not set
CONFIG_SUNRPC=m
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m

#
# Profiling support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=y

#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_FRAME_POINTER is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_KPROBES is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_4KSTACKS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_CRYPTO_WP512 is not set
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES_586=m
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set

#
# Library routines
#
CONFIG_CRC_CCITT=y
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_PC=y

--- FILE linux-config-target ---
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.10
# Sat Feb 26 17:01:29 2005
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y

#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set

#
# Loadable module support
#
CONFIG_MODULES=y
# CONFIG_MODULE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
CONFIG_M386=y
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_X86_PPRO_FENCE=y
CONFIG_X86_F00F_BUG=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_HPET_TIMER=y
# CONFIG_HPET_EMULATE_RTC is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_PREEMPT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_HIGHMEM=y
# CONFIG_HIGHPTE is not set
CONFIG_MATH_EMULATION=y
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_IRQBALANCE=y
# CONFIG_REGPARM is not set

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION=""

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
CONFIG_ACPI_IBM=m
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y

#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set

#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
# CONFIG_PCMCIA_OBSOLETE is not set
CONFIG_PCMCIA=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_PD6729=y
CONFIG_I82092=y
CONFIG_I82365=y
CONFIG_TCIC=y
CONFIG_PCMCIA_PROBE=y

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_CML1=y
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_OTHER is not set
# CONFIG_PARPORT_1284 is not set

#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
# CONFIG_ISAPNP is not set
# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_LBD=y
# CONFIG_CDROM_PKTCDVD is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set

#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
CONFIG_SCSI_DPT_I2O=m
# CONFIG_SCSI_IN2000 is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_SCSI_SATA=y
CONFIG_SCSI_SATA_AHCI=y
CONFIG_SCSI_SATA_SVW=y
CONFIG_SCSI_ATA_PIIX=y
CONFIG_SCSI_SATA_NV=y
CONFIG_SCSI_SATA_PROMISE=y
CONFIG_SCSI_SATA_SX4=y
CONFIG_SCSI_SATA_SIL=y
CONFIG_SCSI_SATA_SIS=y
CONFIG_SCSI_SATA_ULI=y
CONFIG_SCSI_SATA_VIA=y
CONFIG_SCSI_SATA_VITESSE=y
CONFIG_SCSI_BUSLOGIC=y
# CONFIG_SCSI_OMIT_FLASHPOINT is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
CONFIG_SCSI_IPR=y
# CONFIG_SCSI_IPR_TRACE is not set
# CONFIG_SCSI_IPR_DUMP is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA6322 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID5=y
CONFIG_MD_RAID6=y
CONFIG_MD_MULTIPATH=y
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_MIRROR=y
CONFIG_DM_ZERO=y

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=y

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set
CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
CONFIG_IEEE1394_CONFIG_ROM_IP1394=y

#
# Device Drivers
#

#
# Texas Instruments PCILynx requires I2C
#
CONFIG_IEEE1394_OHCI1394=y

#
# Protocol Drivers
#
# CONFIG_IEEE1394_VIDEO1394 is not set
CONFIG_IEEE1394_SBP2=y
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394=y
# CONFIG_IEEE1394_DV1394 is not set
CONFIG_IEEE1394_RAWIO=y
# CONFIG_IEEE1394_CMP is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set

#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=y
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
# CONFIG_IP_NF_FTP is not set
# CONFIG_IP_NF_IRC is not set
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_AMANDA is not set
CONFIG_IP_NF_QUEUE=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_LIMIT=y
CONFIG_IP_NF_MATCH_IPRANGE=y
CONFIG_IP_NF_MATCH_MAC=y
CONFIG_IP_NF_MATCH_PKTTYPE=y
CONFIG_IP_NF_MATCH_MARK=y
CONFIG_IP_NF_MATCH_MULTIPORT=y
CONFIG_IP_NF_MATCH_TOS=y
CONFIG_IP_NF_MATCH_RECENT=y
CONFIG_IP_NF_MATCH_ECN=y
CONFIG_IP_NF_MATCH_DSCP=y
CONFIG_IP_NF_MATCH_AH_ESP=y
CONFIG_IP_NF_MATCH_LENGTH=y
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_MATCH_TCPMSS=y
CONFIG_IP_NF_MATCH_HELPER=y
CONFIG_IP_NF_MATCH_STATE=y
CONFIG_IP_NF_MATCH_CONNTRACK=y
CONFIG_IP_NF_MATCH_OWNER=y
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_REALM is not set
# CONFIG_IP_NF_MATCH_SCTP is not set
# CONFIG_IP_NF_MATCH_COMMENT is not set
# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_IP_NF_TARGET_TCPMSS=y
CONFIG_IP_NF_NAT=y
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_IP_NF_TARGET_NETMAP=y
CONFIG_IP_NF_TARGET_SAME=y
# CONFIG_IP_NF_NAT_LOCAL is not set
# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_TOS=y
CONFIG_IP_NF_TARGET_ECN=y
CONFIG_IP_NF_TARGET_DSCP=y
CONFIG_IP_NF_TARGET_MARK=y
CONFIG_IP_NF_TARGET_CLASSIFY=y
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=y
CONFIG_IP_NF_ARP_MANGLE=y

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
CONFIG_BT=y
CONFIG_BT_L2CAP=y
CONFIG_BT_SCO=y
CONFIG_BT_RFCOMM=y
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=y
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=y

#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=y
CONFIG_BT_HCIUSB_SCO=y
CONFIG_BT_HCIUART=y
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_BCSP_TXCRC=y
CONFIG_BT_HCIBCM203X=y
CONFIG_BT_HCIBFUSB=y
CONFIG_BT_HCIDTL1=y
CONFIG_BT_HCIBT3C=y
CONFIG_BT_HCIBLUECARD=y
CONFIG_BT_HCIBTUART=y
CONFIG_BT_HCIVHCI=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
# CONFIG_NET_SB1000 is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL1=y
CONFIG_EL2=y
CONFIG_ELPLUS=y
CONFIG_EL16=y
CONFIG_EL3=y
CONFIG_3C515=y
CONFIG_VORTEX=y
CONFIG_TYPHOON=y
CONFIG_LANCE=y
CONFIG_NET_VENDOR_SMC=y
CONFIG_WD80x3=y
CONFIG_ULTRA=y
CONFIG_SMC9194=y
CONFIG_NET_VENDOR_RACAL=y
CONFIG_NI52=y
CONFIG_NI65=y

#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_DE2104X=y
CONFIG_TULIP=y
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=y
CONFIG_WINBOND_840=y
CONFIG_DM9102=y
CONFIG_PCMCIA_XIRCOM=y
CONFIG_AT1700=y
CONFIG_DEPCA=y
CONFIG_HP100=y
CONFIG_NET_ISA=y
# CONFIG_E2100 is not set
# CONFIG_EWRK3 is not set
# CONFIG_EEXPRESS is not set
# CONFIG_EEXPRESS_PRO is not set
# CONFIG_HPLAN_PLUS is not set
# CONFIG_HPLAN is not set
# CONFIG_LP486E is not set
# CONFIG_ETH16I is not set
CONFIG_NE2000=y
# CONFIG_ZNET is not set
# CONFIG_SEEQ8005 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
CONFIG_AMD8111_ETH=y
# CONFIG_AMD8111E_NAPI is not set
CONFIG_ADAPTEC_STARFIRE=y
# CONFIG_ADAPTEC_STARFIRE_NAPI is not set
CONFIG_AC3200=y
CONFIG_APRICOT=y
CONFIG_B44=y
CONFIG_FORCEDETH=y
CONFIG_CS89x0=y
CONFIG_DGRS=y
CONFIG_EEPRO100=y
# CONFIG_EEPRO100_PIO is not set
CONFIG_E100=y
# CONFIG_E100_NAPI is not set
CONFIG_FEALNX=y
CONFIG_NATSEMI=y
CONFIG_NE2K_PCI=y
CONFIG_8139CP=y
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_SIS900=y
CONFIG_EPIC100=y
CONFIG_SUNDANCE=y
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_TLAN=y
CONFIG_VIA_RHINE=y
# CONFIG_VIA_RHINE_MMIO is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
CONFIG_ACENIC=y
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=y
CONFIG_E1000=y
# CONFIG_E1000_NAPI is not set
CONFIG_NS83820=y
CONFIG_HAMACHI=y
CONFIG_YELLOWFIN=y
CONFIG_R8169=y
# CONFIG_R8169_NAPI is not set
CONFIG_SK98LIN=y
CONFIG_VIA_VELOCITY=y
CONFIG_TIGON3=y

#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
CONFIG_S2IO=m
# CONFIG_S2IO_NAPI is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y

#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
# CONFIG_ARLAN is not set
# CONFIG_WAVELAN is not set
# CONFIG_PCMCIA_WAVELAN is not set
# CONFIG_PCMCIA_NETWAVE is not set

#
# Wireless 802.11 Frequency Hopping cards support
#
CONFIG_PCMCIA_RAYCS=y

#
# Wireless 802.11b ISA/PCI cards support
#
CONFIG_AIRO=y
CONFIG_HERMES=y
CONFIG_PLX_HERMES=y
CONFIG_TMD_HERMES=y
CONFIG_PCI_HERMES=y
CONFIG_ATMEL=y
CONFIG_PCI_ATMEL=y

#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
CONFIG_PCMCIA_HERMES=y
CONFIG_AIRO_CS=y
CONFIG_PCMCIA_ATMEL=y
CONFIG_PCMCIA_WL3501=y

#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
CONFIG_PRISM54=y
CONFIG_NET_WIRELESS=y

#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=y
CONFIG_PCMCIA_3C574=y
CONFIG_PCMCIA_FMVJ18X=y
CONFIG_PCMCIA_PCNET=y
CONFIG_PCMCIA_NMCLAN=y
CONFIG_PCMCIA_SMC91C92=y
CONFIG_PCMCIA_XIRC2PS=y
CONFIG_PCMCIA_AXNET=y

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=y
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=y
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=y
# CONFIG_PPP_BSDCOMP is not set
CONFIG_PPPOE=y
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_PCIPS2=y
# CONFIG_SERIO_RAW is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
CONFIG_INPUT_UINPUT=y

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_CS is not set
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=y
CONFIG_AGP_ALI=m
CONFIG_AGP_ATI=m
CONFIG_AGP_AMD=m
CONFIG_AGP_AMD64=m
CONFIG_AGP_INTEL=y
CONFIG_AGP_INTEL_MCH=m
CONFIG_AGP_NVIDIA=m
CONFIG_AGP_SIS=m
CONFIG_AGP_SWORKS=m
CONFIG_AGP_VIA=m
CONFIG_AGP_EFFICEON=m
CONFIG_DRM=y
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_I810=m
CONFIG_DRM_I830=m
CONFIG_DRM_I915=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set

#
# I2C support
#
# CONFIG_I2C is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m

#
# Video For Linux
#

#
# Video Adapters
#
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set

#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_SF16FMR2 is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=y
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set

#
# Logo configuration
#
# CONFIG_LOGO is not set

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_RTCTIMER is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# ISA devices
#
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set

#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CS46XX=m
# CONFIG_SND_CS46XX_NEW_DSP is not set
CONFIG_SND_CS4281=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_KORG1212=m
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_HDSP=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_YMFPCI=m
CONFIG_SND_ALS4000=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_FM801=m
CONFIG_SND_FM801_TEA575X=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VX222=m

#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m

#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_VXP440 is not set
# CONFIG_SND_PDAUDIOCF is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set

#
# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
#
CONFIG_USB_MIDI=m
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_RW_DETECT is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set

#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
CONFIG_USB_EGALAX=m
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set

#
# USB Network Adapters
#
CONFIG_USB_CATC=y
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
CONFIG_USB_USBNET=y

#
# USB Host-to-Host Cables
#
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_GENESYS=y
CONFIG_USB_NET1080=y
CONFIG_USB_PL2301=y
CONFIG_USB_KC2190=y

#
# Intelligent USB Devices/Gadgets
#
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_ZAURUS=y
CONFIG_USB_CDCETHER=y

#
# USB Network Adapters
#
CONFIG_USB_AX8817X=y

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
CONFIG_USB_CYTHERM=m
# CONFIG_USB_PHIDGETKIT is not set
CONFIG_USB_PHIDGETSERVO=m
# CONFIG_USB_TEST is not set

#
# USB ATM/DSL drivers
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
# CONFIG_MMC is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
CONFIG_MINIX_FS=y
CONFIG_ROMFS_FS=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
# CONFIG_DEVFS_DEBUG is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
# CONFIG_EXPORTFS is not set
CONFIG_SUNRPC=m
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m

#
# Profiling support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=y

#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_FRAME_POINTER is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_KPROBES is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_4KSTACKS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_CRYPTO_WP512 is not set
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES_586=m
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set

#
# Library routines
#
CONFIG_CRC_CCITT=y
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_PC=y

--- FILE buildroot-config ---
#
# Automatically generated make config: don't edit
#
BR2_HAVE_DOT_CONFIG=y
# BR2_arm is not set
# BR2_armeb is not set
# BR2_cris is not set
BR2_i386=y
# BR2_m68k is not set
# BR2_mips is not set
# BR2_mipsel is not set
# BR2_powerpc is not set
# BR2_sh3 is not set
# BR2_sh3eb is not set
# BR2_sh4 is not set
# BR2_sh4eb is not set
# BR2_sparc is not set
BR2_ARCH="i386"

#
# Build options
#
BR2_WGET="wget --passive-ftp"
# BR2_TAR_VERBOSITY is not set
BR2_STAGING_DIR="$(BUILD_DIR)/staging_dir"
BR2_JLEVEL=1

#
# Toolchain Options
#

#
# Kernel Header Options
#
# BR2_KERNEL_HEADERS_2_4_25 is not set
# BR2_KERNEL_HEADERS_2_4_27 is not set
# BR2_KERNEL_HEADERS_2_6_8 is not set
BR2_KERNEL_HEADERS_2_6_9=y
BR2_DEFAULT_KERNEL_HEADERS="2.6.9"

#
# uClibc Options
#
# BR2_UCLIBC_VERSION_SNAPSHOT is not set
# BR2_ENABLE_LOCALE is not set

#
# Binutils Options
#
# BR2_BINUTILS_VERSION_2_14_90_0_6 is not set
# BR2_BINUTILS_VERSION_2_14_90_0_7 is not set
# BR2_BINUTILS_VERSION_2_14_90_0_8 is not set
# BR2_BINUTILS_VERSION_2_15 is not set
# BR2_BINUTILS_VERSION_2_15_90_0_1 is not set
# BR2_BINUTILS_VERSION_2_15_90_0_1_1 is not set
# BR2_BINUTILS_VERSION_2_15_90_0_2 is not set
# BR2_BINUTILS_VERSION_2_15_90_0_3 is not set
# BR2_BINUTILS_VERSION_2_15_91_0_1 is not set
BR2_BINUTILS_VERSION_2_15_91_0_2=y
# BR2_BINUTILS_VERSION_2_15_92_0_2 is not set
# BR2_BINUTILS_VERSION_2_15_94_0_1 is not set
# BR2_BINUTILS_VERSION_2_15_94_0_2 is not set
BR2_BINUTILS_VERSION="2.15.91.0.2"

#
# Gcc Options
#
# BR2_GCC_VERSION_2_95 is not set
# BR2_GCC_VERSION_3_3_3 is not set
# BR2_GCC_VERSION_3_3_4 is not set
# BR2_GCC_VERSION_3_3_5 is not set
# BR2_GCC_VERSION_3_4_0 is not set
# BR2_GCC_VERSION_3_4_1 is not set
BR2_GCC_VERSION_3_4_2=y
# BR2_GCC_VERSION_3_4_3 is not set
BR2_GCC_VERSION="3.4.2"
BR2_GCC_USE_SJLJ_EXCEPTIONS="--enable-sjlj-exceptions"
BR2_EXTRA_GCC_CONFIG_OPTIONS=""
# BR2_INSTALL_LIBSTDCPP is not set

#
# Ccache Options
#
BR2_CCACHE=y

#
# Gdb Options
#
# BR2_PACKAGE_GDB is not set
# BR2_PACKAGE_GDB_SERVER is not set

#
# Common Toolchain Options
#
# BR2_ENABLE_MULTILIB is not set
BR2_LARGEFILE=y
BR2_TARGET_OPTIMIZATION="-Os -pipe"

#
# Package Selection for the target
#

#
# The default minimal system
#
# BR2_PACKAGE_BUSYBOX is not set

#
# The minimum needed to build a uClibc development system
#
# BR2_PACKAGE_BASH is not set
# BR2_PACKAGE_BZIP2 is not set
# BR2_PACKAGE_COREUTILS is not set
# BR2_PACKAGE_DIFFUTILS is not set
# BR2_PACKAGE_ED is not set
# BR2_PACKAGE_FINDUTILS is not set
# BR2_PACKAGE_FLEX is not set
# BR2_PACKAGE_GAWK is not set
# BR2_PACKAGE_GCC_TARGET is not set
# BR2_PACKAGE_CCACHE_TARGET is not set
# BR2_PACKAGE_GREP is not set
# BR2_PACKAGE_MAKE is not set
# BR2_PACKAGE_PATCH is not set
# BR2_PACKAGE_SED is not set
# BR2_PACKAGE_TAR is not set

#
# Other stuff
#
# BR2_PACKAGE_AUTOCONF is not set
# BR2_PACKAGE_AUTOMAKE is not set
# BR2_PACKAGE_BERKELEYDB is not set
# BR2_PACKAGE_BISON is not set
# BR2_PACKAGE_BOA is not set
# BR2_PACKAGE_BRIDGE is not set
# BR2_PACKAGE_CONFIG is not set
# BR2_PACKAGE_CUSTOMIZE is not set
# BR2_PACKAGE_DHCP_RELAY is not set
# BR2_PACKAGE_DISTCC is not set
# BR2_PACKAGE_DNSMASQ is not set
# BR2_PACKAGE_DROPBEAR_SSHD is not set
# BR2_PACKAGE_FAKEROOT is not set
# BR2_PACKAGE_FILE is not set
# BR2_PACKAGE_GETTEXT is not set
# BR2_PACKAGE_GZIP is not set
# BR2_PACKAGE_HOSTAP is not set
# BR2_PACKAGE_HOTPLUG is not set
# BR2_PACKAGE_IPROUTE2 is not set
# BR2_PACKAGE_IPTABLES is not set
# BR2_PACKAGE_JPEG is not set
# BR2_PACKAGE_LESS is not set
# BR2_PACKAGE_LIBFLOAT is not set
# BR2_PACKAGE_LIBGLIB12 is not set
# BR2_PACKAGE_LIBMAD is not set
# BR2_PACKAGE_LIBPNG is not set
# BR2_PACKAGE_LIBTOOL is not set
# BR2_PACKAGE_LINKS is not set
# BR2_PACKAGE_LINUX is not set
# BR2_PACKAGE_LRZSZ is not set
# BR2_PACKAGE_LTP-TESTSUITE is not set
# BR2_PACKAGE_LTRACE is not set
# BR2_PACKAGE_LZO is not set
# BR2_PACKAGE_M4 is not set
# BR2_PACKAGE_MICROCOM is not set
# BR2_PACKAGE_MICROWIN is not set
# BR2_PACKAGE_MKDOSFS is not set
# BR2_PACKAGE_MKE2FS is not set
# BR2_PACKAGE_MPG123 is not set
# BR2_PACKAGE_MROUTED is not set
# BR2_PACKAGE_NANO is not set
# BR2_PACKAGE_NCURSES is not set
# BR2_PACKAGE_NETKITBASE is not set
# BR2_PACKAGE_NETKITTELNET is not set
# BR2_PACKAGE_NETSNMP is not set
# BR2_PACKAGE_NEWT is not set
# BR2_PACKAGE_NTP is not set
# BR2_PACKAGE_OPENSSH is not set
# BR2_PACKAGE_OPENSSL is not set
# BR2_PACKAGE_OPENVPN is not set
# BR2_PACKAGE_PCIUTILS is not set
# BR2_PACKAGE_PCMCIA is not set
# BR2_PACKAGE_PORTAGE is not set
# BR2_PACKAGE_PORTMAP is not set
# BR2_PACKAGE_PPPD is not set
# BR2_PACKAGE_PROCPS is not set
# BR2_PACKAGE_PYTHON is not set
# BR2_PACKAGE_RAIDTOOLS is not set
# BR2_PACKAGE_RSYNC is not set
# BR2_PACKAGE_RXVT is not set
# BR2_PACKAGE_SFDISK is not set
# BR2_PACKAGE_SLANG is not set
# BR2_PACKAGE_SOCAT is not set
# BR2_PACKAGE_STRACE is not set
# BR2_PACKAGE_TINYLOGIN is not set
# BR2_PACKAGE_TINYX is not set
# BR2_PACKAGE_TN5250 is not set
# BR2_PACKAGE_TTCP is not set
# BR2_PACKAGE_UDHCP is not set
# BR2_PACKAGE_UTIL-LINUX is not set
# BR2_PACKAGE_VALGRIND is not set
# BR2_PACKAGE_VTUN is not set
# BR2_PACKAGE_WGET is not set
# BR2_PACKAGE_WHICH is not set
# BR2_PACKAGE_WTOOLS is not set
# BR2_PACKAGE_ZLIB is not set

#
# Target Options
#
# BR2_TARGET_ROOTFS_CRAMFS is not set
# BR2_TARGET_ROOTFS_EXT2 is not set
# BR2_TARGET_ROOTFS_JFFS2 is not set
# BR2_TARGET_ROOTFS_SQUASHFS is not set

--- FILE busybox-config ---
#
# Automatically generated make config: don't edit
#
HAVE_DOT_CONFIG=y

#
# General Configuration
#
# CONFIG_FEATURE_BUFFERS_USE_MALLOC is not set
CONFIG_FEATURE_BUFFERS_GO_ON_STACK=y
# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set
# CONFIG_FEATURE_VERBOSE_USAGE is not set
# CONFIG_FEATURE_INSTALLER is not set
# CONFIG_LOCALE_SUPPORT is not set
# CONFIG_FEATURE_DEVFS is not set
# CONFIG_FEATURE_DEVPTS is not set
# CONFIG_FEATURE_CLEAN_UP is not set
# CONFIG_FEATURE_SUID is not set
# CONFIG_SELINUX is not set

#
# Build Options
#
# CONFIG_STATIC is not set
CONFIG_LFS=y
USING_CROSS_COMPILER=y
CROSS_COMPILER_PREFIX="/home/zaphod/toast/linux/toolchain/gcc-3.3.x/toolchain_i386/i386-linux-uclibc/bin/"
EXTRA_CFLAGS_OPTIONS=""

#
# Installation Options
#
CONFIG_INSTALL_NO_USR=y
PREFIX="./_install"

#
# Archival Utilities
#
# CONFIG_AR is not set
CONFIG_BUNZIP2=y
# CONFIG_CPIO is not set
# CONFIG_DPKG is not set
# CONFIG_DPKG_DEB is not set
CONFIG_GUNZIP=y
# CONFIG_FEATURE_GUNZIP_UNCOMPRESS is not set
CONFIG_GZIP=y
# CONFIG_RPM2CPIO is not set
# CONFIG_RPM is not set
CONFIG_TAR=y
CONFIG_FEATURE_TAR_CREATE=y
CONFIG_FEATURE_TAR_BZIP2=y
# CONFIG_FEATURE_TAR_FROM is not set
CONFIG_FEATURE_TAR_GZIP=y
# CONFIG_FEATURE_TAR_COMPRESS is not set
CONFIG_FEATURE_TAR_OLDGNU_COMPATABILITY=y
CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y
# CONFIG_FEATURE_TAR_LONG_OPTIONS is not set
# CONFIG_UNCOMPRESS is not set
# CONFIG_UNZIP is not set

#
# Common options for cpio and tar
#
# CONFIG_FEATURE_UNARCHIVE_TAPE is not set

#
# Coreutils
#
CONFIG_BASENAME=y
# CONFIG_CAL is not set
CONFIG_CAT=y
CONFIG_CHGRP=y
CONFIG_CHMOD=y
CONFIG_CHOWN=y
CONFIG_CHROOT=y
# CONFIG_CMP is not set
CONFIG_CP=y
CONFIG_CUT=y
CONFIG_DATE=y
CONFIG_FEATURE_DATE_ISOFMT=y
CONFIG_DD=y
CONFIG_DF=y
CONFIG_DIRNAME=y
# CONFIG_DOS2UNIX is not set
CONFIG_DU=y
CONFIG_FEATURE_DU_DEFALT_BLOCKSIZE_1K=y
CONFIG_ECHO=y
CONFIG_FEATURE_FANCY_ECHO=y
CONFIG_ENV=y
CONFIG_EXPR=y
CONFIG_FALSE=y
# CONFIG_FOLD is not set
CONFIG_HEAD=y
# CONFIG_FEATURE_FANCY_HEAD is not set
# CONFIG_HOSTID is not set
CONFIG_ID=y
CONFIG_INSTALL=y
# CONFIG_LENGTH is not set
CONFIG_LN=y
# CONFIG_LOGNAME is not set
CONFIG_LS=y
CONFIG_FEATURE_LS_FILETYPES=y
CONFIG_FEATURE_LS_FOLLOWLINKS=y
# CONFIG_FEATURE_LS_RECURSIVE is not set
CONFIG_FEATURE_LS_SORTFILES=y
CONFIG_FEATURE_LS_TIMESTAMPS=y
CONFIG_FEATURE_LS_USERNAME=y
# CONFIG_FEATURE_LS_COLOR is not set
CONFIG_MD5SUM=y
CONFIG_MKDIR=y
# CONFIG_MKFIFO is not set
CONFIG_MKNOD=y
CONFIG_MV=y
CONFIG_OD=y
CONFIG_PRINTF=y
CONFIG_PWD=y
# CONFIG_REALPATH is not set
CONFIG_RM=y
CONFIG_RMDIR=y
CONFIG_SEQ=y
# CONFIG_SHA1SUM is not set
CONFIG_SLEEP=y
# CONFIG_FEATURE_FANCY_SLEEP is not set
CONFIG_SORT=y
CONFIG_STTY=y
CONFIG_SYNC=y
CONFIG_TAIL=y
# CONFIG_FEATURE_FANCY_TAIL is not set
CONFIG_TEE=y
# CONFIG_FEATURE_TEE_USE_BLOCK_IO is not set
CONFIG_TEST=y

#
# test (forced enabled for use with shell)
#
CONFIG_FEATURE_TEST_64=y
CONFIG_TOUCH=y
CONFIG_TR=y
CONFIG_TRUE=y
# CONFIG_TTY is not set
CONFIG_UNAME=y
CONFIG_UNIQ=y
# CONFIG_USLEEP is not set
# CONFIG_UUDECODE is not set
# CONFIG_UUENCODE is not set
# CONFIG_WATCH is not set
CONFIG_WC=y
# CONFIG_WHO is not set
CONFIG_WHOAMI=y
CONFIG_YES=y

#
# Common options for cp and mv
#
# CONFIG_FEATURE_PRESERVE_HARDLINKS is not set

#
# Common options for ls and more
#
CONFIG_FEATURE_AUTOWIDTH=y

#
# Common options for df, du, ls
#
CONFIG_FEATURE_HUMAN_READABLE=y

#
# Common options for md5sum, sha1sum
#
CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y

#
# Console Utilities
#
# CONFIG_CHVT is not set
CONFIG_CLEAR=y
# CONFIG_DEALLOCVT is not set
# CONFIG_DUMPKMAP is not set
CONFIG_LOADFONT=y
CONFIG_LOADKMAP=y
CONFIG_OPENVT=y
CONFIG_RESET=y
CONFIG_SETKEYCODES=y

#
# Debian Utilities
#
# CONFIG_MKTEMP is not set
# CONFIG_PIPE_PROGRESS is not set
# CONFIG_READLINK is not set
# CONFIG_RUN_PARTS is not set
# CONFIG_START_STOP_DAEMON is not set
CONFIG_WHICH=y

#
# Editors
#
# CONFIG_AWK is not set
# CONFIG_PATCH is not set
CONFIG_SED=y
CONFIG_VI=y
CONFIG_FEATURE_VI_COLON=y
CONFIG_FEATURE_VI_YANKMARK=y
CONFIG_FEATURE_VI_SEARCH=y
CONFIG_FEATURE_VI_USE_SIGNALS=y
CONFIG_FEATURE_VI_DOT_CMD=y
CONFIG_FEATURE_VI_READONLY=y
CONFIG_FEATURE_VI_SETOPTS=y
CONFIG_FEATURE_VI_SET=y
CONFIG_FEATURE_VI_WIN_RESIZE=y
CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y

#
# Finding Utilities
#
CONFIG_FIND=y
CONFIG_FEATURE_FIND_MTIME=y
CONFIG_FEATURE_FIND_PERM=y
CONFIG_FEATURE_FIND_TYPE=y
CONFIG_FEATURE_FIND_XDEV=y
CONFIG_FEATURE_FIND_NEWER=y
CONFIG_FEATURE_FIND_INUM=y
CONFIG_GREP=y
CONFIG_FEATURE_GREP_EGREP_ALIAS=y
CONFIG_FEATURE_GREP_FGREP_ALIAS=y
# CONFIG_FEATURE_GREP_CONTEXT is not set
# CONFIG_XARGS is not set

#
# Init Utilities
#
CONFIG_INIT=y
CONFIG_FEATURE_USE_INITTAB=y
# CONFIG_FEATURE_INITRD is not set
# CONFIG_FEATURE_INIT_COREDUMPS is not set
CONFIG_FEATURE_EXTRA_QUIET=y
CONFIG_HALT=y
CONFIG_POWEROFF=y
CONFIG_REBOOT=y
# CONFIG_MESG is not set

#
# Login/Password Management Utilities
#
# CONFIG_USE_BB_PWD_GRP is not set
# CONFIG_ADDGROUP is not set
# CONFIG_DELGROUP is not set
# CONFIG_ADDUSER is not set
# CONFIG_DELUSER is not set
# CONFIG_GETTY is not set
# CONFIG_LOGIN is not set
# CONFIG_PASSWD is not set
# CONFIG_SU is not set
# CONFIG_SULOGIN is not set
# CONFIG_VLOCK is not set

#
# Miscellaneous Utilities
#
# CONFIG_ADJTIMEX is not set
# CONFIG_CROND is not set
# CONFIG_CRONTAB is not set
# CONFIG_DC is not set
# CONFIG_DEVFSD is not set
# CONFIG_LAST is not set
# CONFIG_HDPARM is not set
# CONFIG_MAKEDEVS is not set
# CONFIG_MT is not set
# CONFIG_RX is not set
CONFIG_STRINGS=y
# CONFIG_TIME is not set
# CONFIG_WATCHDOG is not set

#
# Linux Module Utilities
#
# CONFIG_INSMOD is not set
# CONFIG_LSMOD is not set
# CONFIG_MODPROBE is not set
# CONFIG_RMMOD is not set

#
# Networking Utilities
#
# CONFIG_FEATURE_IPV6 is not set
# CONFIG_ARPING is not set
# CONFIG_FTPGET is not set
# CONFIG_FTPPUT is not set
CONFIG_HOSTNAME=y
# CONFIG_HTTPD is not set
CONFIG_IFCONFIG=y
CONFIG_FEATURE_IFCONFIG_STATUS=y
# CONFIG_FEATURE_IFCONFIG_SLIP is not set
CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ=y
CONFIG_FEATURE_IFCONFIG_HW=y
# CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS is not set
# CONFIG_IFUPDOWN is not set
# CONFIG_INETD is not set
# CONFIG_IP is not set
CONFIG_IPCALC=y
CONFIG_FEATURE_IPCALC_FANCY=y
# CONFIG_IPADDR is not set
# CONFIG_IPLINK is not set
# CONFIG_IPROUTE is not set
# CONFIG_IPTUNNEL is not set
# CONFIG_NAMEIF is not set
# CONFIG_NC is not set
# CONFIG_NETSTAT is not set
CONFIG_NSLOOKUP=y
CONFIG_PING=y
CONFIG_FEATURE_FANCY_PING=y
CONFIG_ROUTE=y
# CONFIG_TELNET is not set
# CONFIG_TELNETD is not set
# CONFIG_TFTP is not set
CONFIG_TRACEROUTE=y
CONFIG_FEATURE_TRACEROUTE_VERBOSE=y
# CONFIG_VCONFIG is not set
CONFIG_WGET=y
CONFIG_FEATURE_WGET_STATUSBAR=y
# CONFIG_FEATURE_WGET_AUTHENTICATION is not set
# CONFIG_FEATURE_WGET_IP6_LITERAL is not set

#
# udhcp Server/Client
#
# CONFIG_UDHCPD is not set
CONFIG_UDHCPC=y
# CONFIG_FEATURE_UDHCP_SYSLOG is not set
# CONFIG_FEATURE_UDHCP_DEBUG is not set

#
# Process Utilities
#
# CONFIG_FREE is not set
CONFIG_KILL=y
# CONFIG_KILLALL is not set
# CONFIG_PIDOF is not set
CONFIG_PS=y
# CONFIG_RENICE is not set
# CONFIG_TOP is not set
# CONFIG_UPTIME is not set
# CONFIG_SYSCTL is not set

#
# Another Bourne-like Shell
#
CONFIG_FEATURE_SH_IS_ASH=y
# CONFIG_FEATURE_SH_IS_HUSH is not set
# CONFIG_FEATURE_SH_IS_LASH is not set
# CONFIG_FEATURE_SH_IS_MSH is not set
# CONFIG_FEATURE_SH_IS_NONE is not set
CONFIG_ASH=y

#
# Ash Shell Options
#
CONFIG_ASH_JOB_CONTROL=y
# CONFIG_ASH_ALIAS is not set
CONFIG_ASH_MATH_SUPPORT=y
CONFIG_ASH_MATH_SUPPORT_64=y
# CONFIG_ASH_GETOPTS is not set
# CONFIG_ASH_CMDCMD is not set
# CONFIG_ASH_MAIL is not set
CONFIG_ASH_OPTIMIZE_FOR_SIZE=y
# CONFIG_ASH_RANDOM_SUPPORT is not set
# CONFIG_HUSH is not set
# CONFIG_LASH is not set
# CONFIG_MSH is not set

#
# Bourne Shell Options
#
CONFIG_FEATURE_SH_EXTRA_QUIET=y
# CONFIG_FEATURE_SH_STANDALONE_SHELL is not set
CONFIG_FEATURE_COMMAND_EDITING=y
CONFIG_FEATURE_COMMAND_HISTORY=15
# CONFIG_FEATURE_COMMAND_SAVEHISTORY is not set
CONFIG_FEATURE_COMMAND_TAB_COMPLETION=y
# CONFIG_FEATURE_COMMAND_USERNAME_COMPLETION is not set
CONFIG_FEATURE_SH_FANCY_PROMPT=y

#
# System Logging Utilities
#
# CONFIG_SYSLOGD is not set
# CONFIG_LOGGER is not set

#
# Linux System Utilities
#
# CONFIG_DMESG is not set
# CONFIG_FBSET is not set
# CONFIG_FDFLUSH is not set
# CONFIG_FDFORMAT is not set
# CONFIG_FDISK is not set
FDISK_SUPPORT_LARGE_DISKS=y
# CONFIG_FREERAMDISK is not set
# CONFIG_FSCK_MINIX is not set
# CONFIG_MKFS_MINIX is not set
# CONFIG_GETOPT is not set
# CONFIG_HEXDUMP is not set
# CONFIG_HWCLOCK is not set
CONFIG_LOSETUP=y
CONFIG_MKSWAP=y
# CONFIG_MORE is not set
# CONFIG_PIVOT_ROOT is not set
# CONFIG_RDATE is not set
CONFIG_SWAPONOFF=y
CONFIG_MOUNT=y
# CONFIG_NFSMOUNT is not set
CONFIG_UMOUNT=y
# CONFIG_FEATURE_MOUNT_FORCE is not set

#
# Common options for mount/umount
#
CONFIG_FEATURE_MOUNT_LOOP=y
CONFIG_FEATURE_MTAB_SUPPORT=y
CONFIG_FEATURE_MTAB_FILENAME="/etc/mtab"

#
# Debugging Options
#
# CONFIG_DEBUG is not set